2010 Polaris Ranger XP Owners Manual - Page 33
2010 Polaris Ranger XP Manual
Page 33 highlights
Park Brake Lever FEATURES AND CONTROLS To help prevent the vehicle from rolling, engage the park brake when parking the vehicle. When the park brake is fully engaged and the park brake indicator is illuminated, engine speed is limited to 1300 RPM in all gears, except neutral. If throttle is applied, this limiting feature prevents operation, which protects the park brake pads from excessive wear. Tip: This feature will not operate properly if the park brake connector or switch (under the hood) malfunctions or becomes disconnected, or if the switch has moved. Check for disconnection, then see your dealer promptly if this feature fails to operate properly. Inspect and adjust park brake cable tension after the first 25 hours of operation and every 100 hours thereafter to ensure proper cable tension. See page 92. Always apply the service brakes before engaging or releasing the park brake. 1. Apply the brakes. 2. Pull the park brake lever downward as far as possible. 3. To release the park brake, apply the brakes. Press the park brake release inward and move the lever upward as far as possible. WARNING! Operating the vehicle while the park brake is engaged could cause loss of control and result in serious injury or death. Always disengage the park brake before operating the vehicle. 29