2010 Polaris RZR EPS Owners Manual - Page 50
2010 Polaris RZR EPS Manual
Page 50 highlights
FEATURES AND CONTROLS Instrument Cluster Rider Information Center Diagnostic Mode Miles/Kilometers Toggle The display in the tripmeter and odometer can be changed to display either standard or metric units of measurement. 1. Enter the diagnostic mode. 2. Toggle to the screen that displays either kilometers (KM) or miles (MP). 3. Press and hold the mode switch until the letters flash, then press and release the switch once. When the display stops flashing, the mode has been set. Downloading Codes The EFI diagnostic mode is for informational purposes only. Please see your Polaris dealer for all major repairs. See page 47 for Blink Codes and Failure Descriptions. Use the following procedure to download blink codes (failure codes) from the EFI module. 1. Place the transmission in PARK. 2. Stop the engine. 3. Turn the key switch to the ON position. 4. Turn the key switch off and on three times in less than five seconds, then leave the switch on. Any blink code numbers stored in the EFI module will display, one at a time, on the screen. The number "61" and the word "END" displays after all codes have been transmitted. 46