2009 Polaris Trail Blazer Owners Manual - Page 92

2009 Polaris Trail Blazer Manual

Get 2009 Polaris Trail Blazer PDF manuals and user guides View all 2009 Polaris Trail Blazer manuals

Page 92 highlights

MAINTENANCE PVT System PVT Drying There may be some instances when water is accidently ingested into the PVT system. Use the following instructions to dry it out before operating. 1. Move the vehicle out of the water. 2. Remove the PVT drain plug. Allow the water to drain completely. Reinstall the drain plug. 3. Start the engine. Place the transmission in neutral. 4. Apply varying throttle for 10-15 seconds to expel the moisture and air-dry the belt and clutches. Do not hold the throttle wide open for more than 10 seconds. 5. Allow the engine RPM to settle to idle speed, then shift the transmission into forward gear. 6. Test for belt slippage. If the belt slips, repeat the process. 7. Take the vehicle to your dealer for service as soon as possible. 89

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
89
MAINTENANCE
PVT System
PVT Drying
There may be some instances when water is accidently ingested into the
PVT system. Use the following instructions to dry it out before operat-
ing.
1.
Move the vehicle out of the water.
2.
Remove the PVT drain plug. Allow the water to drain completely.
Reinstall the drain plug.
3.
Start the engine. Place the transmission in neutral.
4.
Apply varying throttle for 10-15 seconds to expel the moisture and
air-dry the belt and clutches.
Do not hold the throttle wide open for
more than 10 seconds.
5.
Allow the engine RPM to settle to idle speed, then shift the trans-
mission into forward gear.
6.
Test for belt slippage. If the belt slips, repeat the process.
7.
Take the vehicle to your dealer for service as soon as possible.