2007 Polaris Hawkeye 4x4 Owners Manual - Page 119
2007 Polaris Hawkeye 4x4 Manual
Page 119 highlights
ADJUSTMENTS Handlebars The handlebars can be adjusted for rider preference. WARNING Improper adjustment of the handlebars or incorrect torquing of the adjuster block tightening bolts can cause limited steering or loosening of the handlebars, resulting in loss of control and possible serious personal injury or death. Follow the adjustment procedures exactly, or see your Polaris dealer for service. 1. Loosen the four handlebar bolts. 2. Adjust the handlebar to the desired height. NOTE: Be sure the handlebars do not contact the gas tank or any other part of the machine when turned fully to the left or right. 3. Torque the front two bolts to 10-12 ft. lbs. (14-17 Nm), then torque the rear two bolts. A gap of up to 1/8" (3 mm) will remain at the rear bolts. Handlebar Bolts 116