2006 Polaris 700 Fusion Owners Manual - Page 111
2006 Polaris 700 Fusion Manual
Page 111 highlights
MAINTENANCE Track Tension Track Maintenance 4. Check for specified slack (1) between the wear surface of the track clip and the plastic slider. Refer to the Track Tension Data Chart on page 107. If the track needs adjustment: 5. Loosen the rear idler shaft bolt (2). 6. Loosen the locknuts (3). 4 3 2 1 10 lbs. (4.5 kg) 16″ (40 cm) 7. Tighten or loosen the track adjusting screws (4) to provide equal adjustment on both sides of the track. 8. Repeat the measurement on the other side of the track. NOTE: Check more frequently when the machine is new. 9. Start the machine and slowly rotate the track at least five revolutions. Let the track come to a stop (do not apply brakes). 10. Check track alignment (see page 106) and adjust as necessary. 11. Tighten the locknuts. 12. Tighten the idler shaft bolts. 13. Torque idler shaft bolts to 35 ft. lbs. (47.5 Nm). 108