2005 Polaris Touring Snowmobiles Owners Manual - Page 111
2005 Polaris Touring Snowmobiles Manual
Page 111 highlights
MAINTENANCE General Maintenance Removing Halogen Bulbs - High/Low Beam 1. Pinch the ends of the spring (1) together and lift until it releases from the spring retainer. NOTE: Do not touch a halogen bulb with bare fingers. Oil from skin leaves a residue, causing a hot spot that will shorten the life of the lamp. 2 3 1 2. Lift spring carefully around wire harness (2) and flip to outside of housing. 3. With the wire harness attached to the bulb (3), withdraw bulb from housing. 4. Grasp bulb by metal base and carefully separate bulb from harness. Installing the Bulb 1. Hold bulb by metal base and install into wire harness. 2. Insert bulb into housing. 3. Carefully flip spring back into housing placing it around wire harness. 4. Squeeze spring together until it is over the spring retainer and release. 5. Verify headlight aim. Removing Halogen Bulbs - High Beam 1. Remove the wire harness (4). 2. Gasp the bulb (5) firmly and twist it 1/2 turn counterclockwise. 3. Remove the bulb from housing and replace with new bulb. 4. Place the bulb and housing back inside the hole and turn the housing 1/2 turn clockwise to lock into place. 5. Reinstall the wire harness to the housing. 108 5 4