2007 Hummer H3 Owner's Manual - Page 218

Playing a Specific Loaded CD For every CD loaded, a number appears on the display. To play a specific CD, first press the CD button, then press the numbered pushbutton that corresponds to the CD. A small bar appears under the CD number that is playing and the track number appears on the display. If an error appears on the display, see "CD Messages" later in this section. Once the CD is removed, the indicator light begins flashing again and another CD ejects. To stop ejecting the CDs, press the LOAD or the eject button. If the CD is not removed, after 25 seconds, the CD automatically pulls back into the player. If CD is pushed back into the player, before the 25 second time period is complete, the player senses an error and tries to eject the CD several times before stopping. Do not repeatedly press the CD eject button to eject a CD after you have tried to push it in manually. The player's 25-second eject timer resets at each press of the eject button, causing the player to not eject the CD until the 25-second time period has elapsed. Z (Eject): Press this button to eject CD(s). To eject the CD that is currently playing, press and release this button. To eject multiple CDs, do the following: 1. Press and hold the CD eject button for five seconds. A beep sounds and the indicator light, located to the right of the slot, begins to flash and EJECT ALL displays. 2. Once the light stops flashing and turns green, REMOVE CD # displays. The CD ejects and can be removed. r (Reverse): Press this button to reverse within the track. [ (Fast Forward): Press this button to fast forward within the track. N (Repeat): With repeat, one track or an entire CD can be repeated. 218