2007 Hummer H3 Owner's Manual - Page 193

Engine Oil Life System With the engine off, turn the key to ON and then press the reset stem until OIL LIFE RESET appears - alternating between OIL LIFE and RESET - on the DIC display. The CHANGE OIL message will alert you to change your oil on a schedule consistent with your driving conditions. Always reset the OIL LIFE message after an oil change. To reset the message, see Engine Oil Life System on page 326. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule in this manual. See Engine Oil on page 323 and Scheduled Maintenance on page 429 for more information. 3. Press and release the reset stem until the language is shown on the DIC display. 4. To view the next available language, press and hold the reset stem for about two seconds. Release the reset stem and press and hold again to view each language. You can choose from English (default), Spanish, or French. 5. Once the desired language is shown on the DIC display, briefly press the reset stem to set your choice. Automatic Door Locks This feature allows you to program your door locks to a preferred setting. To set your choice for this feature, perform the following steps: 1. With the engine off, turn the key to LOCK. Do not remove the key from the ignition. 2. Press and hold the power door lock button for about three seconds until the DIC display shows the current door lock mode. Language This feature allows you to choose the language in which the DIC display will show information. To set your choice for this feature, perform the following steps: 1. With the engine off, turn the key to ON. 2. Close all doors and make sure that the DOORS message is not displayed in the DIC. 193