2011 Honda Odyssey Owner's Manual - Page 636
2011 Honda Odyssey Manual
Page 636 highlights
Lights (Back-up light) CONNECTOR 5. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 6. Insert the socket back into the light assembly. Turn it clockwise to lock it in place. TAB (Taillight) BULB 7. Reinstall the base gasket. 8. Push the electrical connector back onto the socket. Make sure it is on all the way. 9. Turn on the lights to make sure the new bulb is working. 10.Reinstall the cover. BASE GASKET SOCKET BULB SOCKET Maintenance 3. Remove the electrical connector from the bulb by pushing on the tab to unlock it, then slide the connector off the bulb. 4. Remove the base gasket as shown, then remove the socket by turning it one-quarter turn counterclockwise. 3. Remove the socket by turning it one-quarter turn counterclockwise. 4. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 2011 Odyssey 633