2011 Honda Odyssey Owner's Manual - Page 194

Driving Position Memory System To cancel the storing procedure after pressing the SET button, do any of the following: Fail to press a memory button within 5 seconds. Pressing the SET button again within 5 seconds. Readjust the seat position. Readjusting the outside mirror position. Each memory button stores only one driving position. Storing a new position erases the previous setting stored in that button's memory. If you want to add a new position while retaining the current one, use the other memory button. All stored driving positions will be lost if your vehicle's battery goes dead or is disconnected. Selecting a Memorized Position To select a memorized position, do this: 1. Make sure the shift lever is in the Park (P) position. 2. Press the desired memory button (1 or 2) until you hear a beep. The system will move the seat and outside mirrors to the memorized positions. The indicator in the selected memory button will flash during movement. When the adjustments are complete, you will hear two beeps, and the indicator will remain on. To stop the system's automatic adjustment, do any of these actions: Press any button on the driver's door: SET, 1, or 2. Instruments and Controls Push any of the adjustment switches for the seat. Shift out of Park. Adjust the outside mirrors. If desired, you can use the adjustment switches to change the positions of the seat or outside mirrors after they are in their memorized positions. If you change the memorized position, the indicator in the memory button will go out. To keep this driving position for later use, you must store it in the driving position memory. 2011 Odyssey 191