2007 Honda Civic Owner's Manual - Page 240

Lights, Cleaning the Seat Belts Replacing a High-mount Brake Light Bulb On DX and LX models Cleaning the Seat Belts LOOP 1. Open the trunk, then remove the holding clips from the cover, and remove the cover. 2. Remove the socket from the light assembly by turning it one-quarter turn counterclockwise. SOCKET BULB 3. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 4. Reinstall the socket. Turn it clockwise until it locks. Make sure the new bulb is working. 5. Reinstall the cover, and tighten its holding clips securely. Maintenance If your seat belts get dirty, use a soft brush with a mixture of mild soap and warm water to clean them. Do not use bleach, dye, or cleaning solvents. Let the belts air-dry before you use the vehicle. CONTINUED 239