2008 BMW M5 Owner's Manual - Page 81

Some Check Control messages are displayed until the malfunctions have been rectified. They cannot be hidden. If a number of malfunctions occur simultaneously, they are displayed in succession. Other messages are automatically hidden after approx. 20 seconds, but remain stored. 5. Change to upper field if necessary. Turn the controller until "Check Control messages" is selected and press the controller. Displaying stored Check Control messages 2. Press the button to display additional messages, the time and outside temperature, or the date. Indication of malfunction urgency Displaying additional information later iDrive, for operating principle refer to page 16. 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. 3. Select "Info sources" and press the controller. 4. Select "Service Info" and press the controller. Depending on your vehicle's equipment, the stored Check Control messages are also displayed with the following symbols: No malfunctions are present in the monitored systems. Malfunctions are present in the monitored systems. Depending on the malfunction, supplementary information is shown on the Control Display. 79 Online Edition for Part no. 01 41 0 014 248 - © 08/07 BMW AG Reference Mobility Communications Entertainment 1. Press the button on the turn signal lever downward. "CHECK OK" or the stored Check Control messages appear in the display. "CHECK OK" is shown if no messages are present. Check Control messages are accompanied by text messages on the Control Display. To exit the display: Select the arrow and press the controller. Navigation Driving tips 6. Select a text message and press the controller. Controls At a glance