2008 BMW M5 Owner's Manual - Page 47
2008 BMW M5 Manual
Page 47 highlights
3. Press the button: The LED in the button lights up. 4. Press the desired memory button 1 or 2: The LED goes out. The positions of the driver's seat, the exterior rearview mirrors, and steering wheel are stored for the remote control currently in use. 6. Select "Central locking" and press the controller. 7. Select "Last seat pos." and press the controller. 8. Select "After unlocking" or "After door opened". Calling up automatically You can choose when the stored positions of the driver's seat, exterior rearview mirrors, and steering wheel are activated. > Calling up when unlocking vehicle > Calling up when opening driver's door When using this feature, always make sure that the footwell behind the driver's seat is empty and unobstructed. Failure to do so could cause injury to persons or damage to objects behind the seat as a result of a rearward movement of the seat.< The system cancels the adjustment procedure when you briefly press one of the seat adjustment switches or one of the memory buttons. 9. Press the controller. Deactivating calling up automatically Navigation Reference Mobility Communications Entertainment Select "Deactivated" and press the controller. Calling up manually Do not call up a position from the memory while the vehicle is moving. There is a risk of accident from unexpected movement of the seat or steering wheel.< Selecting calling up automatically iDrive, for operating principle refer to page 16. 1. Open the start menu. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 4. Select "Vehicle / Tires" and press the controller. 5. Change to upper field if necessary. Turn the controller until "Door locks" is selected and press the controller. Comfort mode 1. Open the driver's door after unlocking or switch on radio readiness. 2. Briefly press the desired memory button 1 or 2. The system cancels the adjustment procedure when you briefly press one of the seat adjustment switches or one of the memory buttons. Safety feature 1. Close the driver's door and switch the ignition on or off. 2. Press the desired memory button 1 or 2 and maintain pressure until the adjustment process has been completed. If the button was pressed inadvertently: press the button again; the LED goes out. 45 Online Edition for Part no. 01 41 0 014 248 - © 08/07 BMW AG Driving tips Controls At a glance