Dell Latitude E6430 Owner's Manual - Page 41
Installing the Palmrest, bluetooth module
View all Dell Latitude E6430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
7. Disconnect the SD card cable from the system board. 8. Lift and remove the palmrest from the computer. Installing the Palmrest 1. Align the palmrest assembly to its original position in the computer and snap it into place. 2. Connect the following cables: a) SD card b) touchpad c) LED 3. Tighten the screws to secure the palmrest to the computer. 4. Install: a) keyboard b) keyboard trim c) bluetooth module d) hard drive e) base cover f) battery 41
7.
Disconnect the SD card cable from the system board.
8.
Lift and remove the palmrest from the computer.
Installing the Palmrest
1.
Align the palmrest assembly to its original position in the computer and snap it into place.
2.
Connect the following cables:
a)
SD card
b)
touchpad
c)
LED
3.
Tighten the screws to secure the palmrest to the computer.
4.
Install:
a)
keyboard
b)
keyboard trim
c)
bluetooth module
d)
hard drive
e)
base cover
f)
battery
41