Dell Latitude E6430 Owner's Manual - Page 38
Installing the Input Output (I/O) Board, Removing the Hard-Drive Support Plate
View all Dell Latitude E6430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
3. Remove the screw that secures the I/O board to the computer. 4. Remove the I/O board from the computer. Installing the Input Output (I/O) Board 1. Place the I/O board in its compartment. 2. Tighten the screws to secure the I/O board. 3. Install: a) system board b) ExpressCard cage c) media board d) palmrest e) display assembly f) keyboard g) keyboard trim h) bluetooth card i) hard drive j) optical drive k) base cover l) battery 4. Follow the procedures in After Working Inside Your Computer. Removing the Hard-Drive Support Plate 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) battery b) base cover 38
3.
Remove the screw that secures the I/O board to the computer.
4.
Remove the I/O board from the computer.
Installing the Input Output (I/O) Board
1.
Place the I/O board in its compartment.
2.
Tighten the screws to secure the I/O board.
3.
Install:
a)
system board
b)
ExpressCard cage
c)
media board
d)
palmrest
e)
display assembly
f)
keyboard
g)
keyboard trim
h)
bluetooth card
i)
hard drive
j)
optical drive
k)
base cover
l)
battery
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Hard-Drive Support Plate
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
battery
b)
base cover
38