2010 Ford Taurus Owner Guide 3rd Printing - Page 72

Lights 3. Remove the bulb socket by turning it counterclockwise and pulling it straight out. 4. To remove the bulb, pull it straight out of the bulb socket. Install the new bulb(s) in reverse order. Replacing rear brake/tail/turn and side marker lamp bulbs The brake/tail/turn and side marker lamp bulbs are located in the tail lamp assembly. Follow the same steps to replace either bulb. • (1) Tail/side marker lamp • (2) Brake/tail lamp • (3) Turn signal lamp 1. Make sure the headlamp switch is in the off position and open the trunk. 2. Remove the press pin and cargo net fastener (if equipped) and carefully pull the carpet away to expose the backside of the tail lamp assembly. 3. Remove the nut and washer assemblies, then pull the lamp assembly away from the vehicle. 72 2010 Taurus (500) Owners Guide, 3rd Printing USA (fus)