2010 Ford Taurus Owner Guide 3rd Printing - Page 271
2010 Ford Taurus Manual
Page 271 highlights
Driving The BLIS and CTA has a yellow indicator (also referred to as the alert) located in the left and right exterior mirrors. When the vehicle is started, the BLIS automatically illuminates both indicators for several seconds indicating the system is operating. The first time you place the transmission in D (Drive) after starting the engine and drive forward at a speed greater than 3 mph (5 km/h) the BLIS system becomes active. Afterwards, the BLIS remains active for all speeds including zero mph. BLIS is also active if the transmission is placed in N (Neutral). If the transmission is shifted out of D (Drive) or N (Neutral) the system will enter the CTA mode (see CTA operation below). Once shifted back in to D (Drive) the BLIS mode will activate once driven above 3 mph (5 km/h). The BLIS will trigger the alert for vehicles that enter your blind zone from the rear or merge in to the blind zone from the side. Vehicles that you pass, or a vehicle that enters the blind zone from the front, will trigger the alert only after the vehicle is present in the blind zone for three seconds. Note: For vehicles that pass through the blind zone quickly, typically less then two seconds, the BLIS will not illuminate the alert. The BLIS consists of two radar sensors each located rearward of the rear wheels hidden behind the bumper fascia. Do not place any type of bumper sticker in this area. Note: The BLIS typically will not detect parked vehicles, humans, animals, or infrastructure (fences, guard rails, trees, etc.). The BLIS does not function when the transmission is in R (Reverse) or P (Park). The BLIS does not provide any additional warning when your turn signal is activated. 271 2010 Taurus (500) Owners Guide, 3rd Printing USA (fus)