2007 Ford Taurus Owner Guide 1st Printing - Page 39

Lights To replace the LED module: 1. Remove the two outboard grommets from the inside of the decklid. 2. On the inside of the decklid, remove the three nuts that hold the spoiler on and remove the spoiler. 3. On the underside of the spoiler, remove the two decorative screw covers (on the LED module). 4. Remove the two screws that are holding the LED module in place. 5. Remove the wiring harness grommet and disengage the electrical connector. 6. Replace the LED module. 7. To complete installation, follow the removal procedure in reverse order. Replacing license plate lamp bulbs 1. Make sure headlamp switch is in OFF position and open trunk lid. 2. Carefully twist and pull the socket from the lamp housing. 3. Carefully pull the bulb from the socket and push in the new bulb. 4. Reinstall the socket in the lamp housing and twist to secure. 39 2007 Taurus (tau) Owners Guide (post-2002-fmt) USA (fus)