Home » ZyXEL Manuals » Wireless » ZyXEL VSG1435 » Manual Viewer

ZyXEL VSG1435 User Guide - Page 320

Firmware Specifications

Add to My Manuals
Save this manual to your list of manuals

Page 320 highlights

Chapter 35 Product Specifications Table 112 Hardware Specifications (continued) Storage Temperature -20º ~ 60º C Operation Humidity 20% ~ 85% RH (non-condensing) Storage Humidity 20% ~ 90% RH (non-condensing) 35.2 Firmware Specifications Table 113 Firmware Specifications Default IP Address 192.168.1.1 Default Subnet Mask 255.255.255.0 (24 bits) Default User Name admin Default Password 1234 DHCP Server IP Pool 192.168.1.33 to 192.168.1.132 Static Routes 16 Device Management Use the web configurator to easily configure the rich range of features on the ZyXEL Device. Wireless Functionality (wireless devices only) Allow the IEEE 802.11b, IEEE 802.11g and/or IEEE 802.11n wireless clients to connect to the ZyXEL Device wirelessly. Enable wireless security (WEP, WPA(2), WPA(2)-PSK) and/or MAC filtering to protect your wireless network. Firmware Upgrade Download new firmware (when available) from the web site and use the web configurator to put it on the ZyXEL Device. Note: Only upload firmware for your specific model! Configuration Backup Make a copy of the ZyXEL Device's configuration. You can put it & Restoration back on the ZyXEL Device later if you decide to revert back to an earlier configuration. HomePNA (Home Phoneline Networking Alliance, also known as HPNA) 3.1 Extend your Internet connection to the coaxial outlets in your house. HPNA is a home networking technology for carrying data over existing coaxial cables and telephone wiring. Port Forwarding If you have a server (mail or web server for example) on your network, you can use this feature to let people access it from the Internet. DHCP (Dynamic Host Configuration Protocol) Use this feature to have the ZyXEL Device assign IP addresses, an IP default gateway and DNS servers to computers on your network. Your device can also act as a surrogate DHCP server (DHCP Relay) where it relays IP address assignment from the actual real DHCP server to the clients. Dynamic DNS Support With Dynamic DNS (Domain Name System) support, you can use a fixed URL with a dynamic IP address. You must register for this service with a Dynamic DNS service provider. 320 VSG1435-B101 Series User's Guide

Section	Page
VSG1435-B101 Series	1
About This User's Guide	3
Document Conventions	5
Safety Warnings	7
Contents Overview	9
Table of Contents	11
User’s Guide	21
Introducing the VSG1435-B101	23
1.1 Overview	23
1.2 Ways to Manage the ZyXEL Device	23
1.3 Good Habits for Managing the ZyXEL Device	23
1.4 Applications for the ZyXEL Device	24
1.4.1 Internet Access	24
1.4.2 HomePNA	26
1.4.3 ZyXEL Device’s USB Support	26
1.5 Hardware Setup	27
1.6 Hardware Connections	29
1.7 LEDs (Lights)	30
1.8 The RESET Button	32
1.9 Wireless Access	32
1.9.1 Using the WLAN/WPS Button	33
The Web Configurator	35
2.1 Overview	35
2.1.1 Accessing the Web Configurator	35
2.2 Web Configurator Layout	38
2.2.1 Title Bar	38
2.2.2 Main Window	39
2.2.3 Navigation Panel	39
Quick Start	43
3.1 Overview	43
3.2 Quick Start Setup	43
Tutorials	45
4.1 Overview	45
4.2 Setting Up an ADSL PPPoE Connection	45
4.3 HomePNA Example Setup	48
4.4 Setting Up a Secure Wireless Network	50
4.4.1 Configuring the Wireless Network Settings	50
4.4.2 Using WPS	52
4.4.3 Without WPS	56
4.5 Setting Up Multiple Wireless Groups	57
4.6 Setting Up NAT Port Forwarding	60
4.7 Configuring Static Route for Routing to Another Network	62
4.8 Configuring QoS Queue and Class Setup	64
4.9 Access the ZyXEL Device Using DDNS	67
4.9.1 Registering a DDNS Account on www.dyndns.org	68
4.9.2 Configuring DDNS on Your ZyXEL Device	68
4.9.3 Testing the DDNS Setting	69
4.10 Access Your Shared Files From a Computer	69
Technical Reference	71
Network Map and Status Screens	73
5.1 Overview	73
5.2 The Network Map Screen	73
5.3 The Status Screen	75
Broadband	79
6.1 Overview	79
6.1.1 What You Need to Know	79
6.1.2 Before You Begin	80
6.2 The Broadband Screen	81
6.2.1 Add/Edit Broadband	82
6.2.2 PPPoE Encapsulation	82
6.3 Technical Reference	90
6.3.1 Encapsulation	90
6.3.2 Multiplexing	91
6.3.3 VPI and VCI	91
6.3.4 IP Address Assignment	91
6.3.5 NAT	92
6.3.6 Traffic Shaping	92
6.3.7 ATM Traffic Classes	93
6.3.8 Introduction to VLANs	93
Wireless	95
7.1 Overview	95
7.1.1 What You Can Do in this Chapter	95
7.1.2 What You Need to Know	96
7.2 The General Screen	96
7.2.1 No Security	99
7.2.2 Basic (WEP Encryption)	100
7.2.3 More Secure (WPA(2)-PSK)	102
7.2.4 WPA(2) Authentication	103
7.3 The More AP Screen	105
7.3.1 Edit More AP	106
7.4 MAC Authentication	107
7.5 The WPS Screen	109
7.6 The WMM Screen	110
7.7 The WDS Screen	111
7.7.1 WDS Scan	113
7.8 The Others Screen	114
7.9 Technical Reference	115
7.9.1 Wireless Network Overview	115
7.9.2 Additional Wireless Terms	117
7.9.3 Wireless Security Overview	118
7.9.4 Signal Problems	121
7.9.5 BSS	121
7.9.6 MBSSID	122
7.9.7 Preamble Type	123
7.9.8 Wireless Distribution System (WDS)	123
7.9.9 WiFi Protected Setup (WPS)	124
Home Networking	131
8.1 Overview	131
8.1.1 What You Can Do in this Chapter	131
8.1.2 What You Need To Know	132
8.1.3 Before You Begin	133
8.2 The LAN Setup Screen	134
8.3 The Static DHCP Screen	136
8.4 The UPnP Screen	137
8.5 Installing UPnP in Windows Example	138
8.6 Using UPnP in Windows XP Example	141
8.7 Technical Reference	146
8.7.1 LANs, WANs and the ZyXEL Device	147
8.7.2 DHCP Setup	147
8.7.3 DNS Server Addresses	147
8.7.4 LAN TCP/IP	148
Static Routing	151
9.1 Overview	151
9.2 The Routing Screen	152
9.2.1 Add/Edit Static Route	153
Quality of Service (QoS)	155
10.1 Overview	155
10.1.1 What You Can Do in this Chapter	155
10.2 What You Need to Know	156
10.3 The Quality of Service General Screen	157
10.4 The Queue Setup Screen	158
10.4.1 Adding a QoS Queue	160
10.5 The Class Setup Screen	161
10.5.1 Add/Edit QoS Class	163
10.6 The QoS Policer Setup Screen	167
10.6.1 Add/Edit a QoS Policer	168
10.7 The QoS Monitor Screen	169
10.8 Technical Reference	170
Policy Forwarding	175
11.1 Overview	175
11.2 The Policy Forwarding Screen	175
11.2.1 Add/Edit Policy Forwarding	176
Network Address Translation (NAT)	179
12.1 Overview	179
12.1.1 What You Can Do in this Chapter	179
12.1.2 What You Need To Know	179
12.2 The Port Forwarding Screen	180
12.2.1 Add/Edit Port Forwarding	182
12.3 The Applications Screen	183
12.3.1 Add New Application	184
12.4 The Port Triggering Screen	185
12.4.1 Add/Edit Port Triggering Rule	187
12.5 The DMZ Screen	189
12.6 The ALG Screen	190
12.7 The Sessions Screen	190
12.8 Technical Reference	191
12.8.1 NAT Definitions	191
12.8.2 What NAT Does	192
12.8.3 How NAT Works	193
12.8.4 NAT Application	194
Dynamic DNS Setup	197
13.1 Overview	197
13.1.1 What You Can Do in this Chapter	198
13.1.2 What You Need To Know	198
13.2 The DNS Entry Screen	199
13.2.1 Add/Edit DNS Entry	200
13.3 The Dynamic DNS Screen	200
IGMP	203
14.1 Overview	203
14.1.1 What You Can Do in this Chapter	203
14.1.2 What You Need to Know	203
14.2 The IGMP General Screen	206
14.3 IGMP Filter Configuration	208
14.3.1 IGMP Host Limitation Edit	210
14.3.2 IGMP Service Add	211
14.3.3 IGMP Host Limitation Add	212
14.4 IGMP ACL Configuration	213
14.4.1 IGMP ACL Add	214
Interface Group	215
15.1 Overview	215
15.1.1 What You Can Do in this Chapter	215
15.2 The Interface Group Screen	215
15.2.1 Interface Group Configuration	217
Firewall	219
16.1 Overview	219
16.1.1 What You Can Do in this Chapter	219
16.1.2 What You Need to Know	220
16.2 The Firewall Screen	221
16.3 The Protocol Screen	221
16.3.1 Add a Protocol	223
16.4 The Access Control Screen	224
16.4.1 Add/Edit an ACL Rule	226
MAC Filter	229
17.1 Overview	229
17.2 The MAC Filter Screen	229
Parental Control	231
18.1 Overview	231
18.2 The Parental Control Screen	231
18.2.1 Add/Edit Parental Control Rule	232
Scheduler Rules	235
19.1 Overview	235
19.2 The Scheduler Rules Screen	235
19.2.1 Add/Edit a Schedule	236
Certificates	237
20.1 Overview	237
20.1.1 What You Can Do in this Chapter	237
20.2 What You Need to Know	237
20.3 The Local Certificates Screen	238
20.3.1 Create Certificate Request	239
20.3.2 Load Signed Certificate	240
20.3.3 Import Certificate	241
20.3.4 Certificate Details	243
20.4 The Trusted CA Screen	245
20.4.1 View Trusted CA Certificate	246
20.4.2 Import Trusted CA Certificate	247
IPSec	249
21.1 Overview	249
21.1.1 What You Can Do in this Chapter	249
21.1.2 What You Need to Know	250
21.2 The IPSec Status Screen	251
21.3 The IPSec Settings Screen	252
21.3.1 Add/Edit IPSec Setting	253
21.3.2 Configuring Manual Key	258
21.4 Technical Reference	260
21.4.1 IPSec Architecture	261
21.4.2 Encapsulation	262
21.4.3 IKE Phases	263
21.4.4 Negotiation Mode	264
21.4.5 IPSec and NAT	264
21.4.6 VPN, NAT, and NAT Traversal	265
21.4.7 ID Type and Content	266
21.4.8 Pre-Shared Key	267
21.4.9 Diffie-Hellman (DH) Key Groups	268
Service Control	269
22.1 Overview	269
22.2 The Service Control Screen	269
ARP Table	271
23.1 Overview	271
23.1.1 How ARP Works	271
23.2 ARP Table Screen	272
Logs	273
24.1 Overview	273
24.1.1 What You Can Do in this Chapter	273
24.1.2 What You Need To Know	273
24.2 The System Log Screen	274
24.3 The Security Log Screen	275
Traffic Status	277
25.1 Overview	277
25.1.1 What You Can Do in this Chapter	277
25.2 The WAN Status Screen	278
25.3 The LAN Status Screen	280
IGMP Status	283
26.1 Overview	283
26.1.1 What You Can Do in this Chapter	283
26.2 The IGMP Group Screen	283
26.3 IGMP Statistics Screen	284
Users Configuration	287
27.1 Overview	287
27.2 The Users Configuration Screen	287
27.2.1 Add/Edit a Users Account	289
Remote Management	291
28.1 Overview	291
28.1.1 What You Can Do in this Chapter	291
28.2 The TR-069 Clients Screen	291
28.3 The TR-064 Screen	293
Time Settings	295
29.1 Overview	295
29.2 The Time Setting Screen	295
Logs Setting	299
30.1 Overview	299
30.2 The Log Settings Screen	299
30.2.1 Example E-mail Log	301
Firmware Upgrade	303
31.1 Overview	303
31.2 The Firmware Screen	303
Configuration	305
32.1 Overview	305
32.2 The Configuration Screen	305
32.3 The Reboot Screen	308
Diagnostic	309
33.1 Overview	309
33.2 The Diagnostic Screen	309
Troubleshooting	311
34.1 Power, Hardware Connections, and LEDs	311
34.2 ZyXEL Device Access and Login	312
34.3 Internet Access	314
34.4 Wireless Internet Access	316
Product Specifications	319
35.1 Hardware Specifications	319
35.2 Firmware Specifications	320
Setting up Your Computer’s IP Address	325
IP Addresses and Subnetting	349
Pop-up Windows, JavaScripts and Java Permissions	359
Wireless LANs	369
Services	385
Open Software Announcements	389
Legal Information	401

Match case Limit results 1 per page

Chapter 35 Product Specifications

VSG1435-B101 Series User’s Guide

320

35.2

Firmware Specifications

Storage Temperature

-20º ~ 60º C

Operation Humidity

20% ~ 85% RH (non-condensing)

Storage Humidity

20% ~ 90% RH (non-condensing)

Table 112

Hardware Specifications (continued)

Table 113

Firmware Specifications

Default IP Address

192.168.1.1

Default Subnet Mask

255.255.255.0 (24 bits)

Default User Name

admin

Default Password

1234

DHCP Server IP Pool

192.168.1.33 to 192.168.1.132

Static Routes

Device Management

Use the web configurator to easily configure the rich range of

features on the ZyXEL Device.

Wireless

Functionality

(wireless devices

only)

Allow the IEEE 802.11b, IEEE 802.11g and/or IEEE 802.11n

wireless clients to connect to the ZyXEL Device wirelessly. Enable

wireless security (WEP, WPA(2), WPA(2)-PSK) and/or MAC filtering

to protect your wireless network.

Firmware Upgrade

Download new firmware (when available) from the web site and

use the web configurator to put it on the ZyXEL Device.

Note: Only upload firmware for your specific model!

Configuration Backup

& Restoration

Make a copy of the ZyXEL Device’s configuration. You can put it

back on the ZyXEL Device later if you decide to revert back to an

earlier configuration.

HomePNA (Home

Phoneline

Networking Alliance,

also known as HPNA)

3.1

Extend your Internet connection to the coaxial outlets in your

house. HPNA is a home networking technology for carrying data

over existing coaxial cables and telephone wiring.

Port Forwarding

If you have a server (mail or web server for example) on your

network, you can use this feature to let people access it from the

Internet.

DHCP (Dynamic Host

Configuration

Protocol)

Use this feature to have the ZyXEL Device assign IP addresses, an

IP default gateway and DNS servers to computers on your

network. Your device can also act as a surrogate DHCP server

(DHCP Relay) where it relays IP address assignment from the

actual real DHCP server to the clients.

Dynamic DNS

Support

With Dynamic DNS (Domain Name System) support, you can use

a fixed URL with a dynamic IP address. You must register for this

service with a Dynamic DNS service provider.