ZyXEL P-2024 User Guide - Page 45
You cannot use the Wizard if the PPPoE remote server cannot be discovered, automatically.
![]() |
View all ZyXEL P-2024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Chapter 3 The Connection Wizard 3.1.5.2 PPPoE " You cannot use the Wizard if the PPPoE remote server cannot be discovered automatically. Figure 15 Connection Wizard > IP Address (PPPoE) The following table describes the labels in this screen. Table 11 Connection Wizard > IP Address (PPPoE) LABEL DESCRIPTION My WAN IP Address Enter the IP address provided by your ISP. First DNS Server Second DNS Server Third DNS Server Select From ISP if your ISP dynamically assigns DNS server information. (In this case, the ISP assigns the WAN IP address too. See Network > WAN > Internet Connection.) The field to the right is read-only, and it displays the IP address provided by your ISP. Select User-Defined if you have the IP address of a DNS server. You might get it from your ISP or from your network. Enter the IP address in the field to the right. Select None if you do not want to use this DNS server. If you select None for all of the DNS servers, you must use IP addresses to configure the P-2024 and to access the Internet. < Back Click this to go to the previous screen. Next > Click this to go to the next screen. Exit Click this to close this screen and return to the main screen. P-2024 User's Guide 45
![](/manual_guide/products/zyxel-p2024-user-guide-72f3e08/45.png)