ZyXEL LTE7490-M904 User Guide - Page 108

Chapter 7 Wireless Table 32 Network Setting > Wireless > More AP Edit (continued) LABEL DESCRIPTION Password Select Generate password automatically or enter a Password. The password has two uses. 1. Manual. Manually enter the same password on the Zyxel Device and the client. Enter 8-63 ASCII characters or exactly 64 hexadecimal ('0-9', 'a-f') characters. 2. WPS. When using WPS, the Zyxel Device sends this password to the client. Note: Enter 8-63 ASCII characters only. 64 hexadecimal characters are not accepted for WPS. more... Encryption Timer Cancel Apply Click the Eye icon to show or hide the password for your wireless network. When the Eye icon is slashed , you'll see the password in plain text. Otherwise, it's hidden. Click this to show more fields in this section. Click this to hide them. AES is the default data encryption type, which uses a 128-bit key. This is the rate at which the RADIUS server sends a new group key out to all clients. Click Cancel to restore your previously saved settings. Click Apply to save your changes. 7.5 MAC Authentication Use this screen to give exclusive access to specific devices (Allow) or exclude specific devices from accessing the Zyxel Device (Deny), based on the MAC address of each device. Every Ethernet device has a unique factory-assigned MAC (Media Access Control) address, which consists of six pairs of hexadecimal characters, for example: 00:A0:C5:00:00:02. You need to know the MAC addresses of the device you want to allow/deny to configure this screen. LTE Series User's Guide 108