Zenith SL-6144 User Guide - Page 3
Strobe/Tune Settings, Ding-Dong, Westminster, Push button Battery Replacement, Install an alkaline
UPC - 016963614604
View all Zenith SL-6144 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Strobe/Tune Settings Your wireless chime has different selectable tunes: Ding-Dong (two flashes/two notes/two flashes) or Westminster (eight flashes/eight notes/eight flashes). The factory setting is for the Westminster tune. This tune can be changed by following the instructions below. • Ding-Dong (Two note tune) Strobe will flash two times, play the two note tune, then flash two more times. Push button: Add a jumper to location 8. • Westminster (Eight note tune) Strobe will flash eight times, play the eight note tune, then flash eight more times. Push button: Remove jumper from location 8. Remove screw to open access door Back of Chime 12345678 12345 6 7 Push button Battery Replacement Install an alkaline type A23 12Volt battery. See diagram inside push button for correct battery orientation. Inside Push Button * Code Settings 1-7 Must Match Both Push Button and Chime Tune Setting Note: Some models might require the use of tweezers to remove and replace the jumpers. 598-1143-01 --