Zenith H27H49S Installation Guide - Page 62
Remote Control Amplifier Volume Override Setup
View all Zenith H27H49S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Remote Control Amplifier Volume Override Setup Set up the TV/amplifier/device sound output to be controlled in other remote control modes. For example, in VCR mode, sound is heard on TV. In Aux mode, Aux sound is heard on Aux device. In Cable mode, you may elect to have the cable box sound heard on the TV or other audio device. 1 Find the code that operates your amplifier / device. Test it to make sure it's the correct one by following the procedure in "Programming The Remote". 2 Press and hold PRG on your remote until the Red LED indicator light stays on, then release it. 3 Press the mode key to select the new output for the sound. Red LED blinks once. 4 Press the Volume + key. Red LED blinks once. 5 Press the mode key you want to change the out- put to the device selected in step 3. Red LED blinks once. 6 Press ENTER when finished. Red LED blinks twice. Example Audio Source Outputs Remote Mode TV VCR Aux Cable Default Audio Output = TV = TV = Aux = Cable Example sound output to an audio amplifier TV = Aux VCR = Aux Aux = Aux Cable = Aux To put everything back to normal, reprogram all modes with their original codes (see "Programming The Remote" on page 60). If you can't find the code for the amplifier, use the Auto Find feature on page 61. 2 Red LED PRG POWER CABLE VCR AUX TV AUDIO FLASHBK MUTE CHANNEL VOLUME VOLUME CHANNEL 1 23 4 56 7 89 0 MENU ENTER A B C CC RECORD PAUSE TIMER TV/VCR SOURCE REWIND PLAY STOP FFWD 3/5 4 6 Page 62