Zenith H27H49S Installation Guide
Zenith H27H49S Manual
 |
View all Zenith H27H49S manuals
Add to My Manuals
Save this manual to your list of manuals |
Zenith H27H49S manual content summary:
- Zenith H27H49S | Installation Guide - Page 1
Installation Guide & Warranty Model Numbers | H27H49S • H32H49S Direct-View PresentationTM TVs © Copyright 2006, LG Electronics U.S.A., Inc. Zenith and the lightning Z logo are registered trademarks of Zenith Electronics Corporation - Zenith H27H49S | Installation Guide - Page 2
Support/Service, please call: 1-888-865-3026 www.lgcommercial.com • www.zenith 40 of the National Electric Code (U.S.A.). The code provides guidelines for proper in accordance with the instruction manual, may cause harmful way without written authorization from LG Electronics U.S.A., Inc. Unauthorized - Zenith H27H49S | Installation Guide - Page 3
reference. Observing the simple precautions discussed in this operating guide can help you get many years of enjoyment and safe operation that are built into your new product. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Follow - Zenith H27H49S | Installation Guide - Page 4
INSTRUCTIONS (Continued from previous page) 19. Servicing 14. Outdoor Antenna Grounding NEC - National Electrical Code Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service - Zenith H27H49S | Installation Guide - Page 5
in later sections. The remote allows access to both the Installer and User menus. The LT2002 Quickset II Clone Programmer is used to duplicate a Zenith TV's setup and install it on another identical Zenith TV. See your Zenith/LG Dealer. Note: Design and specifications are subject to change without - Zenith H27H49S | Installation Guide - Page 6
TV and all accessories. 2. Connect the TV to antenna and all external video source equipment. See pages 15 - 23. 3. Install batteries in remote control. Back of Remote 8. Adjust Installer menu items per requirements. See pages 47 through 55. Customize the TVs Features for the End User 9. Fine-tune - Zenith H27H49S | Installation Guide - Page 7
Problems? See troubleshooting on page 13 for Computer/TV setup problems. Notes • Avoid using hookup cables of excessive length (longer than 25 feet). Long cables can adversely affect image quality and Computer/TV performance. • Not all computer cables will work with the TV. See your Zenith/LG - Zenith H27H49S | Installation Guide - Page 8
Computer Hookup Read the following overview/instructions to set up and use the Presentation TV 3 On the Source menu, highlight "REAR COMPUTER SVGA" (Rear Computer in) then press ENTER on the remote to change to the computer image source. Or plug the computer connector into "Computer In" on the TV - Zenith H27H49S | Installation Guide - Page 9
Computer Hookup Make the connections with the 15-ft. "Video-Mirror" cable exactly as shown. Also refer to the preceding page for audio connections and "Using the monitor function." An accessory packet is included with all TV models. A 15-ft. cable with a "video mirror" for providing a computer - Zenith H27H49S | Installation Guide - Page 10
PC Windows Environment Setting up your computer for optimum picture output in the Windows operating system environment WINDOWS Environment The following is a step-by-step procedure for setting your computer's picture output to optimum display quality. 1. Plug in your computer to the Presentation - Zenith H27H49S | Installation Guide - Page 11
ICONS on your menu palette. Due to a less flexible platform, you will not be able to effect the fonts/size on the Menu Bar. This Zenith TV is a high quality, low cost alternative to a true SVGA monitor. Page 11 - Zenith H27H49S | Installation Guide - Page 12
control, to select the computer source that you want to appear on your screen. 3 Press Enter, or the Left/Right arrow on the remote, to change to the new source. Press ENTER again to remove menu. PRG POWER CABLE VCR AUX TV AUDIO FLASHBK MUTE CHANNEL VOLUME VOLUME CHANNEL 1 - Zenith H27H49S | Installation Guide - Page 13
picture the way you want. Preset moves all the above options back to their original, factory-set levels. 2 Using the Up/Down arrow on the remote control, choose Contrast on the menu. 3 Using the Left/Right arrow, change the contrast level as preferred. 4 Press ENTER to remove menu, or repeat from - Zenith H27H49S | Installation Guide - Page 14
Computer Setup Troubleshooting Some quick and easy tips to resolving problems when using the Presentation TV as a Computer Monitor Symptoms Possible Cause(s) computer picture. • Computer display output is not optimized. -See page 13 for instructions to optimize computer's image. Page 14 - Zenith H27H49S | Installation Guide - Page 15
TV Connections Overview A brief overview of the connections available on this TV Use this page for reference when connecting analog or digital signal sources and other source equipment. To hook up source equipment, refer to the next page; shows pages to go to for equipment hookup options. Also, see - Zenith H27H49S | Installation Guide - Page 16
then you don't need any adapters! A 300 to 75 ohm adapter is not included with the LG TV. TV Back Antenna DIGITAL C O ANTENNA M P U T E R I N M.P.I. RF Cable The wire that comes from an off-air antenna or cable service provider. Each end looks like a hex shaped nut with a wire - Zenith H27H49S | Installation Guide - Page 17
480I R L AUDIO OUT Y IN R L PB R L PR R AUDIO L Cable Service with a Cable Box 1 Locate the Antenna/Cable in jack on the back of the TV re using a cable box, Auto Program might only find the channel your cable service is on (usually channel 3 or 4). The TV digital tuner does not work - Zenith H27H49S | Installation Guide - Page 18
the illustration. If you have a 75 ohm RF cable, then you don't need any adapters! A 300 to 75 ohm adapter is not included with the LG TV. No A/V cables are included with the TV. Without A/V cables, most VCRs will not play videocassettes in stereo sound. Antenna VCR Back RF Coaxial Wire - Zenith H27H49S | Installation Guide - Page 19
to the Digital Antenna input on the TV to get digital programming. 6 Make the other VCR-TV connections as indicated in the illustration. For cable service without a cable box, connect a 75 ohm cable between the cable wall jack and the VCR In jack. No A/V cables are included with the TV. Without - Zenith H27H49S | Installation Guide - Page 20
Hook Up S-Video DVD Player or VCR Connect an S-Video source to the TV S-Video DVD Player or VCR 1 Locate the S-Video out jack on the DVD player or VCR. 2 On the DVD player or VCR, connect the S-Video out jack to the S-Video in jack on the TV according to the connection diagram shown to the right. 3 - Zenith H27H49S | Installation Guide - Page 21
Hook Up DVD Component Video Connect an S-Video source to the TV S-Video DVD Player or VCR 1 Locate the S-Video out jack on the DVD player or VCR. 2 On the DVD player or VCR, connect the SVideo out jack to the S-Video in jack on the TV according to the connection diagram shown to the right. 3 Make - Zenith H27H49S | Installation Guide - Page 22
Hook Up Composite Audio/Video Connect the TV to a composite audio/video source Composite Audio/Video 1 Locate the composite audio/video input jacks on the TV. 2 Connect the composite audio/video input jacks to a composite audio/video device as shown in the illustration. Typical TV Back DIGITAL C - Zenith H27H49S | Installation Guide - Page 23
Hook Up an External Speaker Connect the TV to an external speaker or amplifier External Speaker 1 Locate the Matrix Out jack on the back of the TV. 2 Connect the Matrix Out jack to an external speaker or audio amplifier as indicated in the illustration. TV Back DIGITAL C O ANTENNA M P U T E - Zenith H27H49S | Installation Guide - Page 24
Front Panel Controls / Source Inputs Using the front panel controls to operate the TV A Power Turns TV on and off. B CC (Captions/Text) Turns selected caption/text option On and Off. C Menu power Displays on screen menus. D Vol - Adjust (Left/Right) Decreases/increases sound level. A - Zenith H27H49S | Installation Guide - Page 25
Control Keys descriptions and their functions for the Remote Control PRG (Program) Programs remote codes. MODE Keys Select remote operating modes. AUDIO Selects available digital channel audio languages. VOLUME Down/Up Adjusts the sound level. Number Keypad Select channels directly; key in channel - Zenith H27H49S | Installation Guide - Page 26
Auto Program (Channel Search) Use Auto Program to specify Antenna or cable service incoming signal source and automatically store all of the channels found by the channel search 1 With the remote control in hand, press the POWER key to turn on the Presentation TV. 2 Press MENU repeatedly until the - Zenith H27H49S | Installation Guide - Page 27
disabled and source priority selection can be changed in the service menu, see service manual. Make connections to Front Audio/Video In or Front Computer /Video In jacks can be selected by keying in 999 on the remote control number keypad. Auto Sense source connections override all other sources. - Zenith H27H49S | Installation Guide - Page 28
the Source Menu 1 Source Selection Press TV/VCR SOURCE on the remote repeatedly to cycle through the available sources. Note: See previous page panel buttons. See page 24 for menu operation instructions. If you need to key-in numbers, use the remote control. Note If the source you want to select - Zenith H27H49S | Installation Guide - Page 29
the Presentation TV Using the MENU key and other keys indicated on the remote, the user can access the menus and displays described below. Menu channels for the user to scroll through using Channel Up/Down. 31 Manually sets up which active channels will appear or not appear when using Channel - Zenith H27H49S | Installation Guide - Page 30
Other Menus and On-Screen Displays Press the remote keys indicated below to access these menus and displays SOURCE ANTENNA/CABLE PRESS: SOURCE TO CHANGE ENTER TO ACTIVATE ALARM MENU TIME NOW 3:11 PM 6: - Zenith H27H49S | Installation Guide - Page 31
page 24 for menu operation instructions. If you need to key-in numbers, then use the remote control. 1 Press MENU repeatedly on the remote until the Setup menu and choose Added. Notes • If the option was turned Off in the Service menu, you will have to reinstate it before it will appear as an - Zenith H27H49S | Installation Guide - Page 32
menus can also be operated by using the TV front panel controls. 3 See page 24 for menu operation instructions. A B C CC 4 If you need to key-in numbers, then use the remote control. RECORD PAUSE TIMER TV/VCR SOURCE REWIND PLAY STOP FFWD Mini Glossary - - - - The 4 dashes will allow - Zenith H27H49S | Installation Guide - Page 33
channel labels To Make Custom Channel Labels 1 First select a channel using the NUMBER keypad and ENTER or the Channel Up/Down arrows, on the remote control. (To select a deleted channel, use the NUMBER keypad and ENTER.) 2 To attach a channel label, press MENU repeatedly to go to the Setup menu - Zenith H27H49S | Installation Guide - Page 34
Clock Set Set the Clock on the Presentation TV SETUP MENU AUTO PRG. ADD/DEL/BK CH. LABELS CLOCK SET TIMER CAPTIONS ALARM MENU LANGUAGE 10:32 AM TIMER SETUP MENU AUTO PRG. ADD/DEL/BK CH. LABELS CLOCK SET TIMER CAPTIONS ALARM MENU LANGUAGE 6:30 AM TIMER 1 With the Setup menu displayed, use the - Zenith H27H49S | Installation Guide - Page 35
CLOCK SET TIMER CAPTIONS ALARM MENU LANGUAGE TO SET TIMER TIMER ON TIME OFF TIME ON/OFF TMR 9:00 AM 7:00 PM ON 1 On the remote, press MENU repeatedly until the Setup menu appears. 2 Use the Up/Down arrow to highlight the Timer option, press the Right arrow. 3 Use the Up - Zenith H27H49S | Installation Guide - Page 36
to get analog captions, all the user needs to do is press CC on the remote and select On - - same for digital channels, select On and pick a appear. Analog Closed Captions/Text Operating Modes Setup On the optional Installer's remote, use MENU, SELECT, and ADJ (Left/Right) arrows to choose Closed - Zenith H27H49S | Installation Guide - Page 37
Captions: Analog-Digital Menu Structures Review Analog and Digital Captions options available Note: Digital captions are only available on some digital channels. Analog Captions Menu Structure SETUP MENU AUTO PROGRAM ADD/DEL/BLNK CH. LABELS SOURCE NAME CLOCK SET TIMER CAPTIONS DEGAUSS LANGUAGE - Zenith H27H49S | Installation Guide - Page 38
Alarm Menu Use the Alarm menu to set a time for the TV to automatically turn itself On SETUP MENU AUTO PRG. ADD/DEL/BK CH. LABELS CLOCK SET TIMER CAPTIONS ALARM MENU LANGUAGE TO SET ALARM ALARM MENU TIME NOW 3:11 PM 6:10 AM TIMER PRESS DIGITS TO SET TIME TIMER TO SELECT AM/PM 1 With the Alarm - Zenith H27H49S | Installation Guide - Page 39
Panel The menus can also be operated by using the TV front panel controls. See page 24 for menu operation instructions. If you need to key-in numbers, then use the remote control. SETUP MENU AUTO PRG. ADD/DEL/BK CH. LABELS CLOCK SET TIMER CAPTIONS ALARM MENU LANGUAGE ENGLISH 1 Press MENU - Zenith H27H49S | Installation Guide - Page 40
Audio Menu Set up the audio menu options for the end user 1 On the remote, press MENU repeatedly to go to the Audio menu. 2 Using Up/Down arrows on the remote con- trol, highlight the audio menu option you want to change. Choose from: • Bass: Increases/decreases lower-end sounds. • Treble: - Zenith H27H49S | Installation Guide - Page 41
CHANNEL other language is being broadcast, the TV can't play it. To hear audio, you 1 23 must select an active language. 4 56 1 On the remote, press AUDIO repeated- ly to scroll the available digital audio languages on the selected channel. • As mentioned above, even though another language is - Zenith H27H49S | Installation Guide - Page 42
the picture appearance to your requirements. Preset = Resets all the above options back to their original, factory-set levels. 2 Using Up/Down arrows on the remote con- trol, choose Contrast on the menu. 3 Use the Left/Right ADJ arrow to change or adjust the contrast level as required. 4 Press ENTER - Zenith H27H49S | Installation Guide - Page 43
by the user who specifies a secret 4-number code, the password. General audience and children viewer are specified. (See following pages.) To insure complete coverage for all TV programs, (movies Set Password option. Use the numbered keys on the remote to set a password. Don't forget the password. - Zenith H27H49S | Installation Guide - Page 44
Parental Control Menu After you have read the preceding page, follow instructions below to set up and activate Parental Control 1 SOURCE MENU SETUP MENU AUDIO MENU VIDEO MENU AGE BLOCK GENERAL CHILDREN UNBLOCKED PARENTAL CONTROL AUX SOURCES - Zenith H27H49S | Installation Guide - Page 45
General Audience Considered suitable for all audiences; children may watch unattended. TV-PG Parental Guidance Unsuitable for younger children, sexual content. X Hard Core Films Same as NC-17 rating. Note: LG Electronics Corporation is not liable for any program content that appears when using - Zenith H27H49S | Installation Guide - Page 46
and Above TV-14 and Above TV-MA Unblocked TV-Y7 Unblocked Blocked Enter Code: - - - - Note: Reset Parental Control Block Hours to Zero and password or has left Parental Control Block active. On the optional installer's remote control, press and hold down MENU until the menu disappears (takes about - Zenith H27H49S | Installation Guide - Page 47
on the following pages Installer menu items can be accessed by using the remote control. Just press and hold MENU (about 8 seconds) until the menu that is intended for qualified service technicians only, is not shown. 8-F Menu Items (not shown here) are service type adjustments and only qualified - Zenith H27H49S | Installation Guide - Page 48
Installer Menu Installer Menu Items 25-I through 61-I Menu Function Item 25-I. FUNCTION PRE. 26-I. NOT USED 27-I. NOT USED 28-I. CH OVER RIDE Value Range 0 - 3 0 / 1 29-I. OLD OCV 0 / 1 30-I. ACK MASK 0 / 1 31-I. POLL RATE 20 - 169 32-I. TIMING PULSE 186 - 227 33-I. NOT USED 34-I. CAMPORT - Zenith H27H49S | Installation Guide - Page 49
Installer Menu Installer Menu Items 62-I through 87-I Menu Function Item 62-I. BCK VIDEO M 63-I. EN PTL COL 64-I. FOR PTL M 65-I. BCK PTL M 66-I. EN SRC COL 67-I. FOR SRC M 68-I. BCK SRC M 69-I. EN CHT COL 70-I. FOR CHT COL 71-I. BCK CHT COL 72-I. NOT USED 73-I. CH NOT AVBLE Value Range 0 - 7 0 / - Zenith H27H49S | Installation Guide - Page 50
Items 0-I. INSTALLER SEQUENCE Gives access to Installer Menu depending on the code selected. 0 = 9876 1 = 4321 2 = 1478 3 = been activity from either the control panel or remote control. *M.P.I. Multiple Protocol Input: Zenith protocol for remote control of TV through RJ11 (M.P.I.) jack on - Zenith H27H49S | Installation Guide - Page 51
Installer Menu Detailed Descriptions for Installer Menu Items 4-I through 14-I when some channels are not on nominal frequencies. Note: BAND is automatically set by AUTO PROGRAM. If some channels were not found by Auto Prg. (Program), select the appropriate AFC setting here and add the channels - Zenith H27H49S | Installation Guide - Page 52
. Note: Clock must be set in order to set the Alarm. 18-I. NOT USED 19-I. NOT USED 20-I. FEATURE LEVEL Default set to ZEN 1 for Zenith IR remote control operation. Set O, P LBL for Zenith Private Label IR remote control operation. WARNING: Do not change the default value unless you have the proper - Zenith H27H49S | Installation Guide - Page 53
Installer Menu Detailed Descriptions for Installer Menu Items 38-I through 59-I 38-I. YPrPb EN. (Not available) Set to 1 to enable rear Component Video input. Set to 0 to disable rear Component Video input. 39-I. REAR VIDEO EN. (Rear Video Enable) Set to 1 to enable rear AUX (Video) input. Set to 0 - Zenith H27H49S | Installation Guide - Page 54
Installer Menu Detailed Descriptions for Installer Menu Items 60-I through 75-I 60-I. EN VIDEO COL (Enable Video Menu Color) Set to 1 to enable custom color settings for the Video menu. Set to 0 to disable custom color settings for the Video menu. 61-I. FOR VIDEO M (Video Menu Foreground Color) 0 - Zenith H27H49S | Installation Guide - Page 55
Installer Menu Detailed Descriptions for Installer Menu Items 76-I through 103-I 76-I. DEFEAT XDS Set to 1 to disable XDS display. Set to 0 to enable XDS display. XDS data (provided at the discretion of the broadcaster), is available only on analog channels. After a channel change, wait 5 seconds - Zenith H27H49S | Installation Guide - Page 56
(Expanded View) Connect cable to TV MPI Jack and follow on screen instructions Status Indicator MPI • green • red Reset Color battery ok battery low LT2002, use the indicated keys on the HP602, LP702 or MBR3447 Zenith installer remotes, or the front panel keys on the TV receiver. Notes: Use - Zenith H27H49S | Installation Guide - Page 57
an overthe-air antenna or cable service and turned On. • Teaching and Learning is only possible between identical model Zenith TVs. (However, the Clone the newly copied setup. • See Troubleshooting to solve problems. A. Set Up a Master TV Using an Zenith Multi-Brand remote like the MBR3447, set up - Zenith H27H49S | Installation Guide - Page 58
or ENTER to go to the Memory Bank Selection Menu. Pick the Memory "Bank" you want to store this Master TV the time needs to be copied from a Zenith TV equipped with M.P.I. Input capability. Once ON/OFF, POWER or ENTER. Follow on-screen instructions to transfer the Setup and other information to the - Zenith H27H49S | Installation Guide - Page 59
give unpredictable results. The specific microprocessor used in any the quick setup instructions accompanying the LT2002 clone Cloning Procedure Troubleshooting Problem Possible Cause Zenith TVs. -Batteries must remain installed to retain time settings. -Must save channel labels to same memory bank - Zenith H27H49S | Installation Guide - Page 60
and push the POWER key. The device should turn Off. If not, try the other codes listed and continue from Step 3. Programming the Zenith remote will allow you to use one remote to work up to 4 different devices, if all remote operating modes are programmed! Not all devices are controllable by your - Zenith H27H49S | Installation Guide - Page 61
Control Auto Find If Programming the Remote did not find the code, try this procedure to automatically find the code for the device. If the remote becomes inoperable, go back to "Programming The Remote" and enter the Zenith TV code for Step 5, see page 60. 2 Red LED 1 Turn the device On you're - Zenith H27H49S | Installation Guide - Page 62
= Aux VCR = Aux Aux = Aux Cable = Aux To put everything back to normal, reprogram all modes with their original codes (see "Programming The Remote" on page 60). If you can't find the code for the amplifier, use the Auto Find feature on page 61. 2 Red LED PRG POWER CABLE VCR AUX TV - Zenith H27H49S | Installation Guide - Page 63
Remote Control Brand Programming Codes Find the device codes you need to program the remote. On this page: TVs and VCRs TVs Goldstar 004 102 106 110 112 113 116 119 122 127 137 143 LG 255 Zenith KENWOOD. . . . . . 014 034 039 043 047 048 LG 154 LLOYD 034 LXI 003 009 013 014 017 034 101 106 - Zenith H27H49S | Installation Guide - Page 64
Remote Control Brand Programming Codes Find the device codes you need to program the remote 034 040 053 054 131 YAMAHA 012 034 039 043 ZENITH 001 034 048 056 058 072 080 101 VCRs-DVDs 228 229 230 HARMAN KARDON. 227 ILO 239 JVC 212 KISS 242 LG 201 210 216 225 LITEON 235 236 MAGNAVOX . . . . - Zenith H27H49S | Installation Guide - Page 65
Programming Codes Find the device codes you need to program the remote. On HOSPITALITY . . . 070 077 JERROLD 002 003 004 008 009 010 052 069 074 LG 058 101 M-NET 037 MACOM 033 MAGNAVOX . . . . . 010 012 064 024 UNITED CABLE . . 004 053 UNIVERSAL . . . . 005 007 014 024 026 027 032 035 VIEWSTAR . . - Zenith H27H49S | Installation Guide - Page 66
Codes Find the device codes you need to program the remote 241 JERROLD 171 KATHREIN . . . . . 218 LEGEND 167 LG 249 251 253 LUTRON 242 LUXOR 172 223 MACOM 120 169 173 255 SATELLITE SERVICE CO 138 145 157 167 195 SCIENTIFIC ATLANTA 142 248 SONY 213 STARCAST . . . . . 151 SUPER GUIDE . . - Zenith H27H49S | Installation Guide - Page 67
Control Brand Programming Codes Find the device codes you need to program the remote. On this page: Audio Devices, CD Players Aux (Audio) GOLDSTAR . . . . . 005 HITACHI 010 JVC 006 039 049 050 KENWOOD . . . . . 001 013 029 031 044 LUXMAN - Zenith H27H49S | Installation Guide - Page 68
Remote Control Mode Key Functions Remote Control default key functions by remote operating mode Key TV Mode Name Zenith 001 VCR Mode Code 225 Cable Mode Code 102 AUX Mode Code 8 9 0 100 MENU ENTER SEL UP SEL DN LEFT ADJ RT GUIDE SUBTITLE INFO/DISP TV/VCR REC PAUSE REW FF PLAY STOP SAT POWER - Zenith H27H49S | Installation Guide - Page 69
outlet doesn't work. No Source image. • Source turned Off. • Source not selected. Remote Control Problems Remote doesn't work. • Remote not in TV mode. • TV software functioning. • Not aimed at remote sensor. • Remote too far from TV or IR path to TV obstructed. • Weak batteries. • Wrong - Zenith H27H49S | Installation Guide - Page 70
Troubleshooting Some Quick and Easy Tips for Resolving Problems Symptoms Picture Reception Poor or no picture. Cable not connected. Connect cable to Antenna/Cable (RF) jack. 15 • Cable service interrupted. Contact cable service. • Antenna set, not CATV. Select 'Cable TV' in Setup menu, run - Zenith H27H49S | Installation Guide - Page 71
Troubleshooting Some Quick and Easy Tips for Resolving Problems Symptoms Possible Cause(s) Source Selection / Source Image Problems Camport (Front Audio/Video) rear jack panel. Connect over-the-air antenna or cable service 15 wire to Antenna/Cable jack. Disconnect equipment from front Video - Zenith H27H49S | Installation Guide - Page 72
Troubleshooting/Maintenance Some Quick and Easy Tips for Resolving Problems Symptom(s) Possible Cause(s) Possible Solution(s) Page(s) Parental Control Problems and Screen Cleaning Careful and regular cleaning can extend the the useful service life of the TV. Be sure to turn the power off and - Zenith H27H49S | Installation Guide - Page 73
Camport R S-Video Description Turns TV power on. Turns TV power off. Selects TV input. Selects Camport Source. Selects Rear S-Video Source. Remote Control IR Codes Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz TC Carrier frequency FCAR = 1/TC = fOSC/12 T1 Duty ratio - Zenith H27H49S | Installation Guide - Page 74
the words found in this guide 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. The end looks like a hex-shaped nut with a all the speakers play the same audio. Multiple Protocol Interface: ZENITH protocol for external control of TV through (M.P.I.) input jack - Zenith H27H49S | Installation Guide - Page 75
Notes Write down any special considerations/comments regarding your installation Page 75 - Zenith H27H49S | Installation Guide - Page 76
installation. Before you ask for warranty service, read "Maintenance and Troubleshooting" in the operating guide. You might avoid a service call. For Customer Support/Service, please call: 1-888-865-3026 www.lgusa.com • www.zenith.com LG Electronics U.S.A., Inc. 2000 Millbrook Drive Lincolnshire
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
 |
 |
Installation Guide & Warranty
Model Numbers
|
H27H49S • H32H49S
Direct-View Presentation
TM
TVs
© Copyright 2006, LG Electronics U.S.A., Inc.
Zenith and the lightning Z logo are registered
trademarks of Zenith Electronics Corporation