Zanussi ZWF825B4PW User Manual - Page 9

necessary electrical ratings. Make sure that they are compatible with the mains power supply. Check that your domestic electrical installation can take the maximum load required, also taking into account any other appliances in use. Connect the appliance to an earthed socket. INSTALLATION ON SUSPENDED FLOORING Suspended wooden floors are particularly susceptible to vibration. To limit vibration we recommend placing a waterproof wooden panel, at least 15 mm thick, under the appliance. It should be screwed to at least 2 floor beams and should extend beyond the front feet. If possible, install the appliance where the floor is more stable. ELECTRICAL CONNECTION At the end of installation you can connect the mains plug to the mains socket. The rating plate on the inner edge of the appliance door and the 'Technical Data' chapter indicate the ACCESSORIES The power supply cable must be easily accessible after installing the appliance. For any electrical work required to install this appliance, contact our Authorised Service Centre. The manufacturer does not accept any responsibility for damage or injury through failure to comply with the above safety precaution. AVAILABLE IN WWW.ZANUSSI.COM/SHOP OR FROM AUTHORISED DEALER Read carefully the instructions supplied with the accessory. Only appropriate accessories approved by ZANUSSI ensure the safety standards of the appliance. If unapproved parts are used, any claims will be invalidated. FIXING PLATE KIT If you install the appliance on a plinth that is not an accessory supplied by ZANUSSI, secure the appliance in the fixing plates. Read carefully the instructions supplied with the accessory. STACKING KIT The tumble dryer can be stacked on the top of the washing machine only by using the correct stacking kit.. WARNING! Do not put the tumble dryer under the washing machine. Verify the compatible stacking kit by checking the depth of your appliances. 9