Zanussi ZWF142E3PW User Manual - Page 12
Dial And Buttons
![]() |
View all Zanussi ZWF142E3PW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
A B C D E F G DIAL AND BUTTONS Door locked indicator. Delay start indicator. The digital indicator can show: • Programme duration (e. g. ). • Delay time (e. g. ). • Cycle end ( ). • Warning code (e.g. ). FlexiTime bars level indicator. Drum clean indicator. Child safety lock indicator. Add garments indicator. Illuminates at the beginning of the Wash phase, while the user can still pause the appliance and add more laundry. INTRODUCTION The options/functions are not available with all washing programmes. Check the compatibility between options/ functions and washing programmes in the "Programme Chart". An option/ function can exclude another one, in this case the appliance doesn't allow you to set incompatible options/ functions. ON/OFF Press this button for a few seconds to activate or deactivate the appliance. Two different tunes sound while switching the appliance on or off. As the Stand-by function automatically deactivates the appliance after several minutes to reduce the energy consumption, you may need to activate the appliance again. For more details, refer to Stand-by paragraph in Daily Use chapter. TEMP. When you select a washing programme, the appliance automatically proposes a default temperature. The indicator Cold = cold water. The indicator of the set temperature comes on. SPIN When you set a programme, the appliance automatically sets the maximum spin speed allowed except programme Denim. Additional spin options: • No Spin . The related indicator comes on. Set this option to deactivate all spin phases. The appliance performs only the draining phase of the selected washing programme. Set this option for very delicate fabrics. The rinse phase uses more water for some washing programmes • Rinse Hold . The related indicator comes on. The final spin is not performed. The water of the last rinse is not drained out to prevent the fabrics from creasing. The washing programme ends with water in the drum. The door stays locked and the drum turns regularly to reduce creasing. You must drain the water to unlock the door. If you touch the Start/Pause button, the appliance performs the spinning phase and drains the water. • Night . The related indicator comes on. The intermediate and the final spinning phases are suppressed and the programme ends with water in the drum. This helps to reduce creasing. The door stays locked. The drum turns 12
![](/manual_guide/products/zanussi-zwf142e3pw-user-manual-86f535e/12.png)