Zanussi ZCG55QGX Product Manaul - Page 20

Minimal distances Dimension A B C D E F mm 650 150 2 400 450 less than 400 Warning! Do not set the appliance on a base Levelling Use small feet on the bottom of appliance to set same level of cooker top surface with other surfaces The stability chain Caution! You must install the stability chain. If you do not install it the appliance can tilt. Before you install stability chain, adjust the appliance to the correct height. Measure down 180 mm from the appliance top surface, then measure right 30 mm (See picture). Mark the position of the wall and this gives anchor point for the stability chain. 180 mm 30 mm Warning! These instructions are only valid in the countries whose symbols appear on this booklet's cover. Gas Category Gas Supply I2H G20 - 20 mbar Gas burners BURNER Auxiliary burner Semi-rapid burner Rapid burner Grill Top Oven Main Oven NORMAL POWER kW 1,0 2,0 2,9 2,7 1,9 1,9 NATURAL GAS inj. 100/mm Btu/h 70 3412 96 6483 119 10236 120 9212 99 6483 99 6483 Gas Connection Use a flexible pipe in compliance with the regulation in force. Be careful they do not come in touch with mobile parts or they are not squeezed. Warning! Only a qualified and competent person must do the gas installation. 20 Warning! Before gas connection disconnect the mains plug from the mains socket or switch off the fuse in the fuse box. Close the primary valve of the gas supply. www.zanussi.com