Yamaha MCR-040PI Owners Manual - Page 15

OPERATION USING USEFUL FUNCTIONS Using setup menu The setup menu appears on the front panel display by pressing SETUP. You can set various useful functions with setup menu. Setup menu PRESET DELETE Parameter or control range (Displays only when the input source is set to FM.) Reference page 10 DIMMER DIMMER ON (25%)/OFF (100%) below TREBLE -6 dB to +6 dB below BASS -6 dB to +6 dB below BALANCE L+5 - CENTER - R+5 below CLOCK SET Hour, minute 12 TIMER SET Time (hour, minute), running time, sound (source, track or preset number), timer on/off 12 WIRELESS SET MCR-140 GROUP A1/A2/A3/B1/B2/B3 5 POWER SAVING MCR-140 NORMAL/ECO below WIRELESS SW MCR-140 NO/YES below 1 2 3 4 5 6 Press SETUP. Select desired setup menu. Confirm with ENTER. Change the settings. Complete the setting.*2 Exit setup menu. Repeat*1 *1 When there are some parameters to set, repeat steps 3 and 4. You can go back to a previous parameter by pressing . *2 To set additional items, repeat steps 2 to 5. y To cancel the setting during the operation, press SETUP. ■ Setting dimmer, tone/balance and power saving mode DIMMER: Changes the brightness of the front panel display. TREBLE*3: Adjusts the high frequency response. BASS*3: Adjusts the low frequency response. BALANCE: Adjusts the volume level of each left and right speaker channel. POWER SAVING: If you set to ECO, you can reduce standby power consumption. However, you cannot turn on the unit by playback operation on your iPod during standby mode. The default setting is NORMAL. This function is available only for MCR-140. WIRELESS SW: Set to YES when you use a subwoofer via the wireless subwoofer kit (SWK-W10, etc., sold separately). The default setting is NO. This function is available only for MCR-140. *3 Also effective when you are using headphones. English 11 En