Whirlpool WRT519SZDD Use & Care Guide - Page 12
Refrigerator, Features
View all Whirlpool WRT519SZDD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Temperature Control For your convenience, the Temperature control is preset at the factory. When you first install your refrigerator, make sure the control is still preset as shown. Recommended Setting Airflow Control The Airflow control regulates the amount of air flowing between the freezer and the refrigerator compartments. When you plug in the refrigerator for the first time, turn the Airflow control to the Recommended setting. Cooling Off/On ■ To turn off cooling, press and hold SETTING for 4 seconds until all lights are illuminated for 1 second. To turn cooling back on, press and hold SETTING again for 4 seconds. NOTE: Neither compartment will cool when the control is set to OFF. Adjusting the Temperature Control If you need to adjust the temperature in either the refrigerator or freezer compartment, use the settings listed in the chart below as a guide. NOTE: Except when starting the refrigerator, do not adjust the control more than one setting at a time. Wait 24 hours between adjustments for the temperature to stabilize. ■ Press SETTING to toggle among the three LED lights which indicate the temperature setting. Reading from left to right, the LED in the first position is the least cold. The LEDs indicate increasingly colder settings as you continue to the right. CONDITION/REASON: ADJUSTMENT: REFRIGERATOR too warm TEMPERATURE Control one setting higher FREEZER too warm/too little AIRFLOW or TEMPERATURE ice Control one setting higher REFRIGERATOR too cold TEMPERATURE Control one setting lower FREEZER too cold AIRFLOW or TEMPERATURE Control one setting lower Adjusting the Airflow Control If you want to temporarily increase the cold airflow to a specific compartment, adjust the control. ■ Max - Increase airflow to the freezer ■ Min - Increase airflow to the refrigerator IMPORTANT: Once the performance is achieved, return the Airflow control to the Recommended setting to keep the refrigerator operating at optimum efficiency. CONDITION/REASON: ADJUSTMENT: Heavy ice use Max Hot room temperature Max - To maintain ice making production rate Large quantity of groceries Min - To quickly chill food and beverages REFRIGERATOR FEATURES Your model may have some or all of these features. Important information to know about glass shelves and covers: Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. Tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use both hands when removing them to avoid dropping. Refrigerator Shelves The shelves in your refrigerator are adjustable to match your individual storage needs. Storing similar food items together in your refrigerator and adjusting the shelves to fit different heights of items will make finding the exact item you want easier. It will also reduce the amount of time the refrigerator door is open, and save energy. To remove and replace a shelf: 1. Remove items from the shelf. 2. Slide the shelf straight out to the stop. 3. Depending on your model, lift back or front of the shelf past the stop. Slide shelf out the rest of the way. 12