Whirlpool EDR2RXD1 Performance Data Sheet - Page 1

Whirlpool EDR2RXD1 Manual

Page 1 highlights

PERFORMANCE DATA SHEET Water Filtration System Model P9WB2L/EDR2RXD1B Capacity 200 Gallons (757 Liters) Replacement Filter EDR2RXD1, EDR2RXD1B, WHR2RXD1, and KAD2RXD1 System tested and certified by NSF International against NSF/ANSI Standard 42, 53, 401 and CSA B483.1 for the reduction of contaminants specified on the Performance Data Sheet. This system has been tested by an independent laboratory according to NSF/ANSI Standards 42, 53, 401 and CSA B483.1 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42, 53, 401 and CSA B483.1. Substance Reduction Aesthetic Effects Influent Challenge Concentration Maximum Permissible Product Water Concentration Average % Reduction Chlorine Taste/Odor Particulate Class I* 2.0 mg/L ± 10% At least 10,000 particles/mL 50% reduction 85% reduction 97.2% Contaminant Reduction Influent Challenge Concentration Maximum Permissible Product Water Concentration Average % Reduction Lead: @ pH 6.5 / @ pH 8.5 0.15 mg/L ± 10% 0.010 mg/L >99.3% / 98.6% Benzene 0.015 mg/L ± 10% 0.005 mg/L 96.0% P-Dichlorobenzene 0.225 mg/L ± 10% 0.075 mg/L >99.8% Carbofuran 0.08 mg/L ± 10% 0.040 mg/L 91.9% Toxaphene 0.015 ± 10% 0.003 mg/L 93.3% Atrazine 0.009 mg/L ± 10% 0.003 mg/L 92.4% Asbestos 107 to 108 fibers/L†† 99% >99% Live Cysts† 50,000/L min. 99.95% >99.99% Turbidity 11 NTU ± 10% 0.5 NTU 99.0% Lindane 0.002 ± 10% 0.0002 mg/L 98.9% Tetrachloroethylene 0.015 mg/L ± 10% 0.005 mg/L >96.6% o-Dichlorobenzene 1.8 mg/L ± 10% 0.60 mg/L >99.9% Ethylbenzene 2.1 mg/L ± 10% 0.70 mg/L 99.4% 1,2,4-Trichlorobenzene 0.210 mg/L ± 10% 0.07 mg/L >99.8% 2,4 - D 0.210 mg/L ± 10% 0.07 mg/L 93.8% Styrene 2.0 mg/L ± 10% 0.1 mg/L 99.8% Toluene 3.0 mg/L ± 10% 1.0 mg/L 87.9% Endrin 0.006 mg/L ± 10% 0.002 mg/L >96.6% Atenolol 200 ± 20% 30 ng/L >95.9% Trimethoprim 140 ± 20% 20 ng/L >96.9% Linuron 140 ± 20% 20 ng/L >96.4% Estrone 140 ± 20% 20 ng/L >97.0% W11356268D 07-Jun-2021 10:14:45 EDT | RELEASED In some European factories the letter "W" of the part code mentioned herein will be automatically replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

W11356268
D
Water Filtration System
Model P9WB2L/EDR2RXD1B Capacity 200 Gallons (757 Liters)
Replacement Filter EDR2RXD1, EDR2RXD1B, WHR2RXD1, and KAD2RXD1
System tested and certified by NSF International against NSF/ANSI Standard 42, 53,
401 and CSA B483.1 for the reduction of contaminants specified on the Performance
Data Sheet.
This system has been tested by an independent laboratory according to NSF/ANSI Standards 42, 53, 401 and CSA B483.1 for the reduction of the
substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or
equal to the permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42, 53, 401 and CSA B483.1.
Substance Reduction Aesthetic
Effects
Influent Challenge Concentration
Maximum Permissible Product
Water Concentration
Average % Reduction
Chlorine Taste/Odor Particulate
Class I*
2.0 mg/L ± 10% At least 10,000
particles/mL
50% reduction 85% reduction
97.2%
Contaminant Reduction
Influent Challenge Concentration
Maximum Permissible Product
Water Concentration
Average % Reduction
Lead: @ pH 6.5 / @ pH 8.5
0.15 mg/L ± 10%
0.010 mg/L
>99.3% / 98.6%
Benzene
0.015 mg/L ± 10%
0.005 mg/L
96.0%
P-Dichlorobenzene
0.225 mg/L ± 10%
0.075 mg/L
>99.8%
Carbofuran
0.08 mg/L ± 10%
0.040 mg/L
91.9%
Toxaphene
0.015 ± 10%
0.003 mg/L
93.3%
Atrazine
0.009 mg/L ± 10%
0.003 mg/L
92.4%
Asbestos
10
7
to 10
8
fibers/L††
99%
>99%
Live Cysts†
50,000/L min.
99.95%
>99.99%
Turbidity
11 NTU ± 10%
0.5 NTU
99.0%
Lindane
0.002 ± 10%
0.0002 mg/L
98.9%
Tetrachloroethylene
0.015 mg/L ± 10%
0.005 mg/L
>96.6%
o-Dichlorobenzene
1.8 mg/L ± 10%
0.60 mg/L
>99.9%
Ethylbenzene
2.1 mg/L ± 10%
0.70 mg/L
99.4%
1,2,4-Trichlorobenzene
0.210 mg/L ± 10%
0.07 mg/L
>99.8%
2,4 - D
0.210 mg/L ± 10%
0.07 mg/L
93.8%
Styrene
2.0 mg/L ± 10%
0.1 mg/L
99.8%
Toluene
3.0 mg/L ± 10%
1.0 mg/L
87.9%
Endrin
0.006 mg/L ± 10%
0.002 mg/L
>96.6%
Atenolol
200 ± 20%
30 ng/L
>95.9%
Trimethoprim
140 ± 20%
20 ng/L
>96.9%
Linuron
140 ± 20%
20 ng/L
>96.4%
Estrone
140 ± 20%
20 ng/L
>97.0%
PERFORMANCE DATA SHEET
07-Jun-2021 10:14:45 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")