WestBend 41032 Instruction Manual - Page 3
SPECIAL NOTE, Clean Before Using, CAUTION, To Assemble Mixer, To Use Mixer
View all WestBend 41032 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
SPECIAL NOTE: When first using your mixer, you may note an off odor from the motor. This is normal and will dissipate as the motor is broken in. • Clean Before Using Before using your mixer the first time, wash the bowls, beaters and the dough hooks in hot soapy water with a dishcloth, rinse and dry. These parts may also be washed in an automatic dishwasher. Wipe mixer head, stand and turntable with a damp cloth and dry. CAUTION: To prevent personal injury or electric shock, do not immerse mixer, its cord or plug in water or other liquid. Your mixer is now ready to use. • To Assemble Mixer - Your mixer requires some assembly before using. Do not plug into electrical outlet until after mixer is assembled. 1. o attach mixer to stand, press and hold down mixer release lever at top of stand. Then position mixer head on stand so metal pin on underside of mixer fits into groove below release lever. When engaged, release the lever. Make sure mixer is securely attached to stand before using. MIXER SHOULD NOT BE USED AS A HAND MIXER. IT MUST ALWAYS BE USED ON THE STAND. 2. Place turntable onto platform of stand, aligning extension on underside into correct opening for size bowl being used, Small or Large. Lip on underside of bowl will fit into groove on turntable 3. To insert beaters, lift mixer head up until it stops. The round shaped beater with the Hexagon collar fits into the left socket of mixer. The square shaped beater, with round collar, fits into the right socket. See symbols on underside of mixer to match beaters. Insert beaters by pushing shaft into socket, turning slightly if needed until they lock in place. Beaters must be inserted into correct socket as they are not interchangeable. 4. To insert dough hooks, lift mixer head up until it stops. The dough hook with the Hexagon collar fits into the left socket and the dough hook with the round collar fits into the right socket. See symbols on underside of mixer to match hooks. Turn hooks slightly if needed until they lock in place. Dough hooks must be inserted into correct socket as they are not interchangeable. • To Use Mixer 1. Make sure speed control dial is set at OFF position and mixer is securely attached to the stand before using. MIXER SHOULD NOT BE USED AS A HAND MIXER. USE ONLY ON STAND. DO NOT USE MIXER UNATTENDED. 2. Position turntable according to size bowl being used. Position bowl onto turntable. 3. Insert beaters or dough hooks into correct sockets. 3