Weber Summit Gold B LP Owner Manual - Page 49
CAUTION: The burner openings 1 must
![]() |
View all Weber Summit Gold B LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Maintenance 11. Lift and twist the burner assembly slightly, to separate the Crossover® tube (a) from the burners (b). (b) (b) 14. To reinstall the manifold assembly, reverse steps 7 through 13. ƽCAUTION: The burner openings (1) must be positioned properly over the valve orifices (2). (2) (a) (1) 12. Remove the Crossover® tube. 13. Pull the selected burner(s) tube(s) from manifold frame and replace with a new burner tube. Check proper assembly before fastening manifold in place. ƽWARNING: After reinstalling the gas lines, they should be leak checked with a soap and water solution before using the grill. (See, "Check for gas leaks.") E-4
![](/manual_guide/products/weber-summit-gold-b-lp-owner-manual-661f2e0/49.png)
E-4
Maintenance
(a)
(b)
(b)
11.
Lift and twist the burner assembly slightly, to separate
the Crossover
®
tube (a) from the burners (b).
12.
Remove the Crossover
®
tube.
13.
Pull the selected burner(s) tube(s) from manifold
frame and replace with a new burner tube.
14.
To reinstall the manifold assembly, reverse steps 7
through 13.
±
CAUTION: The burner openings (1) must be
positioned properly over the
valve orifices (2).
(2)
(1)
Check proper assembly before fastening manifold in
place.
±
WARNING: After reinstalling the gas lines, they
should be leak checked with a soap and water
solution before using the grill. (See,
“
Check for gas
leaks.
”
)