Weber Summit FT 600 NG Operation Guide - Page 12

MAINTENANCE 12. Slide the burner assembly from each Heat Zone. The left and right burners are connected by the Crossover tube. Figure 13 (a). Pull out of here 14. To reinstall the burners, reverse steps 3 through 13. CAUTION: The burner openings must be positioned properly over the valve orifices. Figure 15 (a). Check proper assembly before fastening manifold in place. Figure 15 (b). (a) Valve Crossover tube Burner (b) Figure 13 13. Lift and twist the burner assembly slightly to separate the crossover tube from the burners. Remove the burners from the cooking box. Figure 14. Separate here Figure 15 15. Reinstall the Spider Stopper Guards. Slightly rotate the Spider Stopper Guards so that the seams are in line with the Venturi fins. There should be no gaps in the seams or in the fit around the burners and valves. Figure 16. Crossover tube Venturi fin Check fit around valve Figure 14 Check fit around burner Figure 16 12