Weber Platinum II 2200 NG Owner Manual - Page 16

SIDE BURNER MAINTENANCE WARNING: All gas controls and supply valves should be in the OFF position. Figure 17 (a). Make sure black wire is connected between igniter and electrode. Make sure white wire is connected between igniter and ground. Check that igniter lock nut is tight. Figure 17 (b) and figure 17 (c). Note - If the igniter works loose, carefully tighten the igniter lock nut with an adjustable wrench or pliers. (a) The Platinum Series II side burner has been factory set for the correct air and gas mixture. The correct flame pattern is shown in Figure 18. Tips occasionally yellowish (b) Dark blue Light blue Figure 18 Igniter lock nut Views from figures 17 (b) and (c) from under side burner Black wire White wire (c) Figure 17 Ground Electrode 16