Vtech bs20-2432 User Manual - Page 27

Handset and Base Operation If the Base is active on one line when the idle line rings, you will hear a special alert tone, signifying an inbound call. This alert is designed to minimize disruption of the call in progress. You can then: • Press SPEAKERPHONE (or HEADSET if you are using a Headset connected to the Base) to end the first call, then Press SPEAKERPHONE or HEADSET to answer the new call; -OR- • Press the HOLD soft key to place the original call on hold. After that, press the appropriate LINE key and then SPEAKERPHONE (or HEADSET) to answer the new call. You can end the new call by pressing SPEAKERPHONE (or HEADSET). Return to the original call by pressing the appropriate LINE key and then SPEAKERPHONE (or HEADSET). You can also Conference both lines together . See Conference Calling, further on in this User's Manual. Mute Function Flash Function During an active call pressing either the MUTE soft key on the Handset or the MUTE key on the Base (when in Speakerphone or Headset mode), will disable the microphone. Press MUTE again to return to the 2-way conversation. Hold Function From the Handset: • Press the HOLD soft key to place a call on hold. To return to the call press the appropriate LINE. From the Base: • During an active call, press the HOLD key to place a call on hold. The LINE key will flash to indicate a call is on hold. • To return to the call press the appropriate LINE and then press SPEAKERPHONE.(or HEADSET) You can use your 20-2432 with services such as call waiting. Simply press the LINE key on the Handset or the FLASH key on the Base (when in Speakerphone or Headset mode) to flash the line. AdvancedOperations 27