Vtech 921adl User Manual - Page 7

FUNCTIONAL LAYOUT FOR HANDSET UNIT LINE 2 KEY VOLUME SLIDE SWITCH LINE 1 KEY * TONE KEY CHAN KEY PROG KEY REDIAL KEY CONF KEY LOW BATT LED OFF KEY NUMBER KEYS MEM KEY HOLD KEY FUNCTION KEYS keys Description LINE 1 To get dial tone when handset in standby mode. To perform flash operation when handset is in Talk mode. LINE 2 To get dial tone when handset in standby mode. To perform flash operation when handset is in Talk mode. OFF To hang up a line. Number For telephone number dialing, keys programming, etc. *TONE To change the dialing mode temporarily from pulse to tone during a call. PROG To enter/exit the programming mode. CHAN To change the channel during a call. HOLD To place a call on HOLD. To add a 2 second pause during telephone number programming. MEM To enter memory dialing mode. CONF To establish a conference call between Line 1 and Line 2 REDIAL To redial the last number dialed. Handset To select the handset volume volume Hight (H), Middle or Low (L) slide switch LED LINE 1 LINE 2 LOW BATT LED status Description ON When handset is connected to line 1. Flash When line1 is ON (fast) HOLD Flash When line 1 is used by (double a parallel connected flashing) telephone. Flash When there is incoming (with ringing call for line 1 singal) ON When handset is connected to line 2 Flash When line 2 is ON (fast) HOLD Flash When line 2 is used by (double a parallel connected flashing) telephone. Flash When there is incoming (with ringing call for line 2 singal) Flash To indicate low battery condition 7