Viper 571XV Owner Manual - Page 21
Press the brake pedal. - remote programming
View all Viper 571XV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
4. Once the vehicle has started, it will run for the pre-programmed period of time (either 12, 24, or 60 minutes - see Programming Options section of this guide) or until a shutdown input is triggered. For a remote start, the remote responds with remote start tones and the Yellow LED illuminates for 3-seconds. For a remote start Off, the remote responds with remote start off tones and the Yellow LED flashes 3-times. important! It is unsafe to operate a vehicle's motor in a garage or other closed off area. Breathing the exhaust from the vehicle is hazardous to your health. Never activate the remote start in an enclosed space. When you are ready to drive the vehicle: 1. Insert the ignition key and turn it to the ON (not the START) position. 2. Press the brake pedal. note: If the brake pedal is pressed before the key is in the ON position, the engine will shut down. While the vehicle is running during remote start operation, the system will monitor the vehicle and will automatically shut down the engine if the system receives any of the following shut-down inputs: ➤ The brake pedal is pressed. ➤ The hood is opened. 18 © 2005 directed electronics-all rights reserved