Viper 5301 Owner Manual - Page 36
Low runtime alert, Cabin temperature - responder le 2 way remote start system
View all Viper 5301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Use one of the below methods to exit Smart Start mode: • Perform the same steps you followed to activate Smart Start mode • Turn the ignition On • Press the brake pedal The parking lights flash 5 times slowly to confirm the remote has exited Smart Start mode. ➢ Low runtime alert During remote start a message is sent three minutes before and then again at one minute before the engine turns off. The 2- way remote plays tones as an alert to reset the runtime if desired. ➢ Cabin temperature Using the Responder LE you have the ability to check the temperature inside the vehicle. Press the button one-time, and then press and hold until the remote beeps, and then release. The LEDs light up indicating the temperature range of the vehicle. 95˚F and above 76˚F to 95˚F 56˚F to 75˚F 32˚F to 55˚F AUX 32˚F and below 28 © 2011 Directed Electronics. All rights reserved.