Viper 4104 Owner Manual - Page 26

Remote and System Operations Passive Locking* Park and exit the vehicle, after the doors are closed the Passive locking countdown begins. The led flashes quickly and upon reaching 20 seconds the siren then chirps once. At 30 seconds the system activates itself. Anytime before the system locks you can re-enter the vehicle or open the trunk to load or unload items and, after closing passive locking resumes. To stay secure in case of accidental unlocking the system, if a door is not opened within 30 seconds the system reactivates itself and locks the doors. Auto Re-locking* Auto re- ensures the vehicle stays locked if it is not entered after unlocking by remote control. After unlocking by remote, the system automatically re-locks the doors (if programmed on) in 30 seconds. Open any point of entry to stop the re-lock until the next unlock by remote. Onetime Bypass* Turn the ignition On for one to three seconds and then Off. The horn honks once to confirm one-time bypass is enabled. One-time bypass can be used to temporarily bypass the Passive locking operation for one cycle. It also bypasses the comfort closure and auxiliary channel outputs if programmed to activate when locking. After the next unlock, all operations return to normal. * The optional horn honk feature must be installed. © 2011 Directed Electronics. All rights reserved. 23