Viper 3002 Owner Manual - Page 17
using your system - installation manual
View all Viper 3002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
note: If programmed Off, no alarms will be notified to the remote. Command information (Armed/Disarmed) will be notified to the remote. To exit programming mode The 2-way LED remote control will exit programming mode after 2-seconds of inactivity and will emit 2 long beeps. using your system The buttons described in this manual correspond to the standard configuration. Remember, this is not the only way your transmitter may be set up. It can be custom configured to meet your needs. See your installer for additional details. ➜ active arming You can arm the system by pressing of your remote for one second. When the system arms, from the vehicle you will hear a short siren sound, or chirp, and see the parking lights flash once. If the power door locks are controlled by the system, the doors will also lock. While the system is armed, the in-vehicle's status LED will flash approximately once per second, indicating that the system is actively protecting your vehicle. If you hear a second chirp after arming and note that the in-vehicle's status LED is flashing in groups, see the Diagnostics Section of this guide. This extra chirp is called Bypass Notification. 18 © 2006 directed electronics