Viper 160XV Owner Manual - Page 16
When you are ready to drive the vehicle - system toggle switch
View all Viper 160XV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
When you are ready to drive the vehicle: 1. Insert the ignition key and turn it to the ON (not the START) position. 2. Press the brake pedal. NOTE: If the brake pedal is pressed before the key is in the ON position, the engine will shut down. While the vehicle is running during remote start operation, the system will monitor the vehicle and will automatically shut down the engine if the system receives any of the following shut-down inputs: ■ The brake pedal is pressed. ■ The hood is opened. ■ The shutdown toggle switch is put into the OFF position. ■ The pre-programmed run time (12, 24, or 60 minutes) has elapsed. ■ Transmitter button is pressed twice in 3 seconds to start the vehicle. Rear Defogger To turn the rear defogger output OFF: 1. Simultaneously press & release the + + buttons on the remote control. 2. The lights will flash 2 times. 3. The rear defogger output will no longer activate when the vehicle is remote started. NOTE: If the remote start is on the parking lights will turn off then flash 2-times before returning to their normal output and the defogger output, if active, will cease. © 2005 Directed Electronics-all rights reserved 13