Viking VICU5301 Installation Instructions - Page 3
Important
View all Viking VICU5301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
IMPORTANT - Please Read and Follow! • DO NOT remove permanently affixed labels, warnings, or plates from product. This may void the warranty. • Please observe all local and national codes and ordinances. Installation must conform with local codes and National Fuel Gas Code ANSIZ233.1/NFPA-54-latest edition. • Please ensure that this product is properly grounded. • The installer must leave these instructions with the consumer who should retain for local inspector's use and for future reference. • Installation must conform with local codes or, in the absence of codes, the National Electrical Code, ANSI/NFPA 70-latest edition. In Canada: Electrical installation must be in accordance with the current CSA C22.1 Canadian Electrical Codes Part 1 and/or local codes. WARNING BURN HAZARD The use of cabinets for storage above the appliance may result in potential burn hazard. Combustible items may ignite, metallic items may become hot and cause burns. If a cabinet storage is to provided the risk can be reduced by installing a range hood that projects horizontally a minimum of 5" (12.7 cm) beyond the bottom of the cabinets. WARNING ELECTRICAL GROUNDING INSTRUCTIONS This cooktop must be electrically grounded in accordance with local codes or, in the absence of codes, with the National Electrical Code, ANSI/NFPA 70latest edition. FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED. CAUTION Be sure the electric power is off from the breaker box to the junction box until the cooktop is installed and ready to operate. The junction box should be connected to a suitable ground. WARNING The electrical power to the unit must be shut off while line connections are being made. Failure to do so could result in serious injury or death. WARNING FIRE AND ELECTRICAL SHOCK HAZARD DO NOT use an extension cord with this appliance. Such use may result in fire, electrical shock, or other personal injury. WARNING The power supply board is provided with the power supply, type RAC03-24SC/277, manufactured by Recom, rated Input 100277Vac, Output 24V/125mA is UL recognized under QAQGQ2/8.E224736. The external overcurrent protection of the primary for this power supply is max.20A. WARNING Stationary appliances not fitted with means for disconnection from the supply mains having a contact separation in all poles that provide full disconnection under overvoltage category III, the insrtuctions shall state that means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules. 3