Viking VGIQ54224 Installation Instructions - Page 8
General Information
View all Viking VGIQ54224 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
General Information • Keep grill area clear and free from combustible materials, gasoline, and other flammable vapors. • When the outdoor grill is not in use, the gas supply must be turned off at the LP gas supply cylinder. • The pressure regulator and hose assembly supplied with the outdoor grill must be used. Replacement pressure regulators and hose assemblies must be those specified by the manufacturer. • Finding a leak is not a "do-it-yourself" procedure. Some leaks can only be found with the burner control in the on position and this must be done by a qualified technician. • The LP supply cylinder to be used must be constructed and marked in accordance with the specifications for LP- gas cylinders of the U.S. Department of Transportation (DOT) or the National Standard of Canada, CAN/CSAB339, Cylinders, Spheres, and Tubes for the Transportation of Dangerous Goods. • Use only extension cords with a 3-prong grounding plug, rated for the power of the equipment, and approved for outdoor use with a W-A marking. • Gas Manifold Pressure- Natural gas - 4.0" W.C.P. LP/Propane - 10.0" W.C.P. WARNING If the following instructions are not followed exactly, a fire causing death or serious injury may occur: • Do not store a spare LP gas cylinder under or near this appliance. • Never fill the cylinder beyond 80 percent full. WARNING This outdoor gas grill is not intended to be installed inside a home or on recreational vehicles and/or boats. WARNING Keep electrical supply cord and the fuel supply hose away from heated surfaces. WARNING This appliance is not fused. Installer must install a ground fault interrupt. WARNING This appliance is not fused. Installer must install a ground fault interrupt. 8