Viking VEDO5302TSS Use and Care Manual - Page 29
Replacing Light, Trouble Shooting, Error Handling
![]() |
View all Viking VEDO5302TSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Product Care Replacing Light Replacing Interior Halogen Oven Lights CAUTION DISCONNECT THE ELECTRIC POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BEFORE REPLACING BULB. Do not touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth. glass light cover 1. Unsnap glass light cover using a screwdriver in the access groove. 2. Firmly grasp light bulb and pull out. access groove 3. Replace with halogen bulb using volt and wattage light bulb requirements listed on glass cover. 4. Replace the light cover by snapping glass cover onto metal box. 5. Reconnect power at the main fuse or circuit breaker. Power Failure Do not attempt to use during a power failure. Unit will not function. 56 Trouble Shooting PROBLEM 1. Oven will not function. 2. Oven does not operate in self-clean mode. 3. Door will not open. 4. Oven light will not work. POSSIBLE CAUSE AND/OR REMEDY Oven is not connected to electrical power. Have electrician check power circuit breaker, wiring and fuses. Door is not shut tight enough for automatic door latch to lock. Oven is still in Self-Clean Mode. If oven is hot, door latch will release when a safe temperature is reached. Light bulb is burned out. Oven is not connected to power. Error Handling In the event that you make an error while programming your Viking oven, you will hear a long beep followed by the appearance of an error message on the display. Use the following key to help you correct these common programming errors: Error Message Problem Correction An incorrect MODEL ERROR model number has been installed. Call your Viking dealer or authorized service agency. RTD ERROR PROBE ERROR RTD is open or shorted. The meat probe is open or shorted. Call your Viking dealer or authorized service agency. The meat probe may not be plugged in. If it isn't, plug it in to the oven. Press the OFF key to exit and clear the error message. LATCH ERROR KEYBOARD ERROR The control is unable to lock or unlock the door latch. No connection exists between the keyboard and control. If the meat probe is plugged in and the Error message is still displayed, call your Viking dealer or authorized service agency. Call your Viking dealer or authorized service agency. Call your Viking dealer or authorized service agency. 57 Product Care
![](/manual_guide/products/viking-veso1302tss-use-care-manual-23b9c93/29.png)