Viking VEDO5302SS Use and Care Manual - Page 22

Cleaning and Maintenance Replacing Interior Halogen Oven Lights CAUTION DISCONNECT THE ELECTRIC POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BEFORE REPLACING BULB. Do not touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth. glass light cover 1. Unsnap glass light cover using a screwdriver in the access groove. access groove 2. Firmly grasp light bulb and pull out. FOR YOUR SAFETY 3. Replace with halogen bulb using volt and wattage light bulb requirements listed on glass cover. 4. Replace the light cover by snapping glass cover onto metal box. 5. Reconnect power at the main fuse or circuit breaker. Power Failure Do not attempt to use during a power failure. Unit will not function. Trouble Shooting Guide PROBLEM 1. Oven will not function. 2. Oven does not operate in self-clean. 3. Oven is not clean after self-clean cycle. 4. Broil does not work. 5. Door will not open. 6. Oven light will not work. POSSIBLE CAUSE AND/OR REMEDY Oven is not connected to electrical power. Have electrician check power circuit breaker, wiring and fuses. Door is not shut tight enough for automatic door latch to lock. Temperature control knob not rotated all the way past clean until it stops. Temperature control knob is rotated too far past broil position. Oven is still in self-clean mode. If oven is hot, door latch will release when a safe temperature is reached. Light bulb is burned out. Oven is not connected to power. Product Care Product Care 42 43