Viking VBO1811 Installation Instructions - Page 6
Installing the Transformer on Grill Base, For Models VBBO5160 / VBBO5260, For Models VQBO5420
![]() |
View all Viking VBO1811 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
INSTALLATION Installing the Transformer on Grill Base For Models VBBO5160 / VBBO5260 Side panel 1. The transformer must be mounted inside the cabinet 2. If you are installing a Viking grill on either side of the burner, there is a hole on either side of the cabinet provided in order to connect the grill to the side or power burner unit. 3. If you are not are installing a Viking grill on either side, locate the four holes in the back panel and feed the AC plug through the hole in the shelf and out the hole in the rear panel. 4. Line up the holes in the transformer with the holes in the rear panel. 5. Using the (4) #10-12 screws that were provided, attach with a drill with a T25 torx bit to secure the transformer to the rear panel. 6. Feed the connector through the hole above to connect it to the side or power burner unit. (4) #10-12 screws power to the unit Rear panel Transformer Power Supply Shelf For Models VQBO5420 1. The transformer must be mounted inside the cabinet 2. Locate the four holes in the back panel and feed the AC plug through the hole in the shelf and out the hole in the rear panel. 3. Line up the holes in the transformer with the holes in the rear panel. 4. Using the (4) #10-12 screws that were provided, attach with a drill with a T25 torx bit to secure the transformer to the rear panel. 5. Feed the connector through the hole above to connect it to the grill 6. If you are installing a Viking side burner or power burner on either side of the grill, there is a hole on either side of the cabinet provided to feed the connector from the grill to the burners. Side panel power to the unit Rear panel (4) #10-12 screws Transformer Shelf Power Supply 6
![](/manual_guide/products/viking-vbo1811-installation-instructions-8ec8876/6.png)