Viking RDSCD2305BSS Installation Instructions - Page 2
IMPORTANT, Table of Contents
View all Viking RDSCD2305BSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Table of Contents Warnings & Important Safety Instructions 3 Dimensions 6 Specifications 7 Clearance Dimensions (Proximity to Cabinets 8 Clearance Dimensions (Wood/Composite Overlay 9 Electrical & Gas Requirements 10 General Information 12 Installation 13 Backguard Installation 13 Door Removal 13 Leg Installation 14 Electrical Connection (3 Wire 15 Electrical Connection (4 Wire 17 Leveling/Adjustments/Alignment 19 Anti-tip Device Installation 20 Wall Mount Anti-tip Installation 20 Floor Mount Anti-tip Installation 21 Connecting Gas & Electrical 22 Final Installation 23 Door Replacement and Adjustment 24 Final Preparation 25 Performance Checklist 25 Service & Registration 26 2 IMPORTANT-Read and Follow! • Before beginning, please read these instructions completely and carefully. • DO NOT remove permanently affixed labels, warnings, or plates from product. This may void the warranty. • All local and national codes and ordinances must be observed. Installation must conform with local codes or in the absence of codes, the National Fuel Gas Code ANSI Z223.1/NFPA-54 -latest edition. • The installer must leave these instructions with the consumer who should retain for local inspector's use and for future reference. In Canada: Installation must be in accordance with the current CAN/CGA B149.1 & 2 Gas Installation codes and/or local codes. Electrical installation must be in accordance with the current CSA C22.1 Canadian Electrical Codes Part 1 and/or local codes. In Massachusetts: All gas products must be installed by a "Massachusetts" licensed plumber or gasfitter. A "T" type handle manual valve must be installed in the gas supply line to the appliance. Your safety and the safety of others is very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others. All safety messages will be preceded by the safety alert symbol and the word "DANGER," "WARNING" or "CAUTION." These words mean: DANGER Hazards or unsafe practices which WILL result in severe personal injury or death. WARNING Hazards or unsafe practices which COULD result in severe personal injury or death. CAUTION Hazards or unsafe practices which COULD result in minor personal injury or property damage. All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. 3