Viking FDFB5361R Installation Instructions - Page 25

Custom Side Panel Dimensions Z-Bracket (2.5 cm) Custom Panel General Information Custom finishing options • All installations must allow for the refrigerator and freezer door to open a minimum of 90˚. • For side wall or corner installation, allow for a standard 3" (7.6 cm) cabinet filler to assure door(s) opens 90˚. Note: If a custom handle is used, a wider filler may be necessary. • Panel thickness must not exceed 1" (2.5 cm) on hinge side. Thicker panels will interfere with door swing and clearance. 1" (0.6 cm) 1/4" .2 (55 4" -3/ m) 1 c 2 3/4" (1.9 cm) End panel (55 4" -3/ ) 21 cm .2 Ice and Water Dispenser Bezel Removal 1 2 (if required) (2182-7 0.5 /8 cm " to ) min 8 (21 4-1 . 3.5 /1 cm 6" )m ax .* Note: Adding 3/4" (1.9 cm) side panels adds an additional 3/4" (1.9 cm) to the overall width of the product for each side panel used. Note: Requires side panel hardware kit (SPHKDS). (2182-7 0.5 /8 cm " t ) min (21 84-1o . 3.5 /1 c m 6" )m ax .* Remove packaging material surrounding bezel. Grasping the sliding lever, pull away from bezel. 3 (61 4 " 24 cm) .0 Optional kickplate notch (Dimensions determined by cabinets) 2 cm) .0 1 (6 Remove spill tray from lower part of bezel exposing 2 screws. Remove screws. 4" *Note: Depending on how high leveling feet are raised, and cabinet enclosure height. 48 49