Viking FDFB5303 Center Trim Kit - Installation Instructions - Page 10
Grille Assembly
View all Viking FDFB5303 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Grille Assembly - Custom Panel Models On Custom Panel models, grill spacers from original unit grilles must be reused: • Remove grille brackets from grille included in the grille kit by removing 4 screws on each grille bracket located on the back of the grille assembly. • Remove grille brackets and spacers from original unit grilles by removing 4 screws on each grille bracket located on the back of each grille assembly. • Install grille brackets and spacers from original unit grilles onto grille from the kit using the original grille hardware. Important: The spacers must be oriented on the new grille the same way they were on the original grille. Also, remember to install the spacers on the corresponding side of the installation (if installing a unit on the left side of an installation, its grille spacers should be installed on the left side of the unified grille.) 10