ViewSonic SW-216 Signage Manager CMS Setup - Page 1

Signage Manager Setup for CDE8620/CDE7520/CDE6520/CDE5520/CDE4320 IMPORTANT NOTE: If you purchased SW-216 Signage Manager licenses, please send the LAN MAC Address of your CDE displays to ViewSonic so it can be added to our activation servers. Software will not activate if this is not fulfilled. Equipment needed - USB Stick (2GB or larger) - Keyboard and Mouse (Wireless preferred) - Display Remote Control - Windows 10 PC to run Signage Manager CMS Application: - Console and Player APK files (included in this zip package) - Signage Manager for Windows - Signage Manager Download Setting up the Display for Signage Manager 1) Turn on the display and follow the initial setup on the screen. 2) Press the Menu button the remote control and go to Advanced menu. a. Power Save = Mode 3 b. ECO Mode = OFF c. Boot Logo = OFF d. Auto Signal Detection = OFF e. No Signal Standby = OFF f. Switched On State = Forced On 3) Press the Home Button on remote control then click Settings a. Network - make sure you have connection to the internet, either by Wired or Wireless LAN b. Device - Signage Display i. Check Unknown Source c. System - About i. Online System Updates - Turn Off Automatic Update Installing the Signage Manager APK's 1) Copy the two APK files on a USB Stick formatted with FAT32 2) Insert the USB Stick to an open USB Port in the back of the display 3) Using the remote, click Home and then Folders